Planet WNAP-7350 Access Point Firmware 2.6_r3279

NOTE:

- This firmware is only for WNAP-7350. There is no way to use the different firmware in the different versions. 
- Thus, the WNAP-7350's firmware only can be used in the correspondent models.

Upgrade Method

1.To upgrade the firmware of your AP, please logon machine and click on the "Advanced" menu.
2.In "Advanced" menu, choose "Firmware Upgrade".
3.In this page. You can use the Browse button to allocate the firmware file on your PC.
4.Once the new firmware file is selected, click "Upload" button to start the upgrade process.
5.After the upgrade is completed, please reset the AP to default setting and re-configure your AP.

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release.