NETGEAR MS510TXPP Switch Firmware 6.7.0.27

Known issues:

- Switch’s DHCPv6 client can't get IPv6 address for management after enable IPv6 routing. [Workaround]: Using static IPv6 address from management.
- Dynamic LAG status is showing up even when LACP protocol is not up and running with peer device. [Workaround]: Enable LACP on peer device.
- Multicast forward entries would not flush immediately when port is shut down. [Workaround]: Wait for the entries to age out when expired.
- Voice VLAN remarking CoS still work when disabled the remarking. [Workaround]: Configure the expected CoS value to lower the impact.
- Linkup port flaps every 60 seconds when port 10 connected a shutdown peer devices with AGM734. [Workaround]: Get the port link up on peer device; or link down the connection by removing the cable.
- SCC can't backup configurations for multiple devices at the same time. [Workaround]: Backup the configurations for one device each time.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.