NETGEAR GS724Tv2 Switch Firmware 1.0.3.30

Modification:

1. Rearranged the DSCP setting page to make it more user-friendly.
2. The SNMP host entries allow duplicate IP address but different community string.
3. Add check to prevent incompatible configuration restoration.
4. Support new private MIB groups (ssQoSGroup, ssStormCtrlGroup, and ssTrustMACGroup)
5. Not forwarding LACP or 802.1x packets to other ports.

Bugs fixed:

1. SNMP GET-NEXT on any OID between BRIDGE-MIB and Netgear’s private MIB does not return the correct value.
2. Fastlink is not disabled a port that received BPDU packet.
3. The GUI page for 802.1Q VLAN cannot be displayed when changing VLAN type from port-based to 802.1Q based.
4. Spanning Tree (STP) may be in the wrong state after setting “switch priority” or “port path cost” when STP is disabled.
5. Trunk port status maybe in the wrong STP state if both STP and Trunk features are enabled during boot up.
6. Reply packet is sent to wrong port if it comes from a trunked port.
7. ARP packets are not properly tagged according to the VLAN.
8. Traffic on the trunk ports is not balanced.
9. It does not work with Safari browser.
10. Restoring configuration file fails with Netscape browser.
11. IP Gateway doesn’t work.
12. QoS is not working properly when packet size is greater than 512 bytes.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.