NETGEAR GS110EMX Switch Firmware 1.0.0.2

Known issue:

- Cable test does not work properly on multi-gig ports (port 9 and port 10) when no cable is connected or the length is less than 5 meter.

Installation Instructions:

- Download the new firmware and store it in local PC, and remember its location in the PC’s file system.
- Unzip it to get the switch firmware image
- There are two methods to upgrade the new firmware from PC to the switch.
- Go to GUI page “Maintenance > Firmware Upgrade".
- Click the Browse button and locate and select the new firmware image file.
- Click the Apply button.
- When the upgrade is complete, your switch restarts. The upgrade process typically takes about three minutes.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.