D-Link DXS-1100-10TS Switch Firmware 1.00.026

Problem Fixed

- D-Link tracking number is enclosed in ()

Upgrading by using Web-UI

1. Connect a workstation installed with java SE runtime environment to management port of the device and also connect console cable to switch’s console port.
2. Open the web browser from the workstation and enter the IP address of the switch. The switch’s default IP address is 10.90.90.90
3. Enter administrator’s username and password when prompted. It should be noted the default login settings are as below:
Username: admin
Password: admin
4. To update switch's firmware or configuration file via TFTP, select Tools > Firmware Upgrade & Backup > Firmware Upgrade from TFTP.
5. Enter the TFTP Server IP address. 6. Enter the name of the firmware file located on the TFTP server. 7. Enter the destination path and the desired file name. 8. Click “Upgrade” button.
9. Transmission will start and wait until the status is completed by displaying 100% complete.
10. Alternatively, the switch's firmware or configuration file can also be upgraded via HTTP, select Tools > Firmware Upgrade & Backup > Firmware Upgrade from HTTP.
11. Enter the source and destination file. 12. Click “Upgrade” button.
13. Transmission will start and wait until the status is completed by displaying 100% complete.
14. To select the boot up image used for next reboot, click Management > Flash System in the function tree and then click the C: drive name. When you see the files list, click corresponding Boot Up button to specify the firmware that will be used for next and subsequent boot up.
15. To reboot the switch, select Tools > Reboot System from the banner.
16. Select Yes and click Reboot button to reboot the switch.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.