Renesas Electronics uPD720201 / uPD720202 USB 3.0 Driver 22.214.171.124
[1. Modified driver]
1-1.Modified the driver not to issue SetFeature(RemoteWake) in a PC, in which SystemWake is in PowerSystemSleeping3.
1-2.There is a possibility that BSOD occurs when the Stress Test of Pnpdtest.exe is excuted with connecting USB HUB having USB devices.
1-3.Additional remediation was implemented for the following ver 126.96.36.199 issue:
[ver 188.8.131.52's history, item 2-4]
2-4. USB3.0 Devices connected with USB3.0 HUB are not detected after S3/S4 resume.
This issue occurs only under the following conditions.
- C_PORT_CONNECTION of the downstream port of the hub is not changed after resume.
- The PERSTB of the system is asserted after resume.
[2. Solved interoperability issue caused by function driver or system]
2-1.Fixed the interoperability issue of the specific docking station integrated SuperSpeed HUB.
2-2.When continues to start & stop the vedio capture with the specific USB2.0 Camera, the specific USB2.0 cannot start the video capture.
2-3.There is a possibility that BSOD occurs when a USB device, which a function driver sends the Power IRP before our device driver handles the "IRP_MN_START_DEVICE", is connected.
It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
- Graphics Board
- Other Drivers & Tools
- Digital Camera / Webcam / Camcorder
- Sound Card
- Printer / Scanner
- Network Card
- Keyboard & Mouse
- Joystick, Gamepad & Wheels
- TV Tuner / Capture Card
- Mobile Phones
- Card Readers
- HDD / SSD / NAS / USB Flash
- TV / HDTV / Projectors
- DVD / Blu-Ray / Media Players
- Router / Switch / AP
- Doesn't matter
- 3 months
- 6 months
- 12 months
- 24 months