Specifications:

CPU
· AMD Athlon 64 X2, Athlon 64, Athlon FX and Sempron in the Socket AM2 package.
Please refer to CPU Support for compatible CPU; the above description is for reference only.

FSB
· HyperTransport supporting speed up to 1GHz (2000MT/s)


Chipset
· AMD 690G and SB600 Chipset


Main Memory
· Supports Dual DDR2 400/533/667/800
- 2 DDR2 DIMMs (240pin / 1.8V)
- Supports a maximum memory size up to 4GB.


Slots
· 1 PCI Express x16 slot
· 1 PCI Express x1 slot
· 2 PCI slots, support 3.3V/ 5V PCI bus Interface.



On-Board IDE
· One IDE port by AMD SB600
- Supports Ultra DMA 66/100/133 mode
- Supports PIO, Bus Master operation mode
- Can connect up to two IDE devices

On-Board SATA
· 4 SATA II ports by AMD SB600
- Supports storage and data transfers at up to 300 MB/s

RAID Function
- SATA II 1~4 supports RAID 0, 1 and 0 1 mode by AMD SB600
MSI Reminds You...
· The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.


Audio
· Chipset integrated by Realtek ALC888
- Flexible 8-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec


LAN
· Supports 10/100 Fast Ethernet by Realtek 8101E
· Supports 10/100/1000 Fast Ethernet by Realtek 8111B


IEEE1394
· Chipset integrated by VIA VT6308
- Transfer rate is up to 400Mbps


Internal I/O Connectors
- ATX 24-pin power connector
- ATX 4-pin 12V CPU power connector
- CPU / System FAN connectors
- Chassis intrusion switch connector
- Front panel audio connector
- Front panel connector
- Clear CMOS jumper
- 1 X CD-in connector
- 1 X SPDIF out connector (optional)
- 1 X SPDIF in connector (optional)
- 1 x TV-out connector (optional)
- 1 x IEEE1394 connector support additional 1 port (optional)
- 3 x USB 2.0 connector support additional 6 ports
- 1 x Floppy disk drive connector
- 4 x Serial ATA II connectors
- 1 x ATA133 connector
MSI Reminds You...
· The floppy disk cable will be optional.


Back Panel I/O Ports
- 1 x Parallel port
- 1 x HDMI port (optional)
- 1 x PS/2 keyboard
- 1 x PS/2 mouse
- 1 x IEEE1394 Port (optional)
- 1 x 6 in 1 audio jack
- 4 x USB 2.0 ports
- 1 x RJ45 LAN jack
- 1 x Graphics Card port


Dimension
· 24.4cm(L) x 21.5cm(W) Micro-ATX Form Factor

Mounting
· 6 mounting holes.

ATI SB600 IDE RAID driver
1. Extract the file and Copy all files to the floppy.
2. Press F6 to install driver through the floppy when booting and loading RAID function.
XP/XP64 Ver: 2.500.1540.39
Vista 32/64 Ver: 2.5.1540.41



It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.