CPU
- Socket AM3 socket for AMD Phenom II processors
- Support 95W Phenom II X6 processors
- High-performance HyperTransport 3.0 CPU Interface
- Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.
CHIPSET
- AMD 785G & AMD SB710
- North Bridge: AMD 785G
- South Bridge: AMD SB710
GRAPHICS
- Integrated DirectX10.1 graphics processor
- Share Memory: Maximum up to 512MB
MEMORY
- Dual-channel DDR3 memory architecture
- 2 x 240-pin DDR3 DIMM socket support up to 16GB per one DIMM support 8GB
- Support DDR3 1333/1066/800 SDRAM
EXPANSION SLOT
- 1 x PCI Express x1 slot
- 1 x PCI Express x16 Gen2.0 slot
- 2 x PCI slots
STORAGE
- Support by AMD SB710
• 2 x Ultra DMA133/100/66 devices
• 6 x Serial ATA 3.0Gb/s devices
• RAID0, RAID1, RAID10 configuration
AUDIO
- VIA VT1705 6-channel audio CODEC
- Compliant with 6ch HD audio specification
LAN
- Atheros AR8131 Gigabit Fast Ethernet Controller (AR8132 10/100 Lan optional)
REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x D-sub(VGA)
- 1 x DVI Port
- 1 x Serial port (COM1)
- 1 x RJ45 LAN connector
- 1 x Audio port (Line-in, Line-out, Mic-in)
- 4 x USB 2.0 Ports
INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4-pin 12V Connector
- 1 x 4pin CPU_FAN connectors
- 1 x 3-pin SYS_FAN connector
- 1 x IDE connector
- 1 x Speaker header
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x SPDIF out header
- 1 x Clear CMOS header
- 1x CD in header
- 6 x Serial ATA 3Gb/s connectors
- 3 x USB 2.0 headers support additional 6 USB ports
- 1 x Chassis intrusion header
SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Audio, LAN, can be disabled in BIOS
- F11 hot key for boot up devices option
- Support over-clocking
- Support eJIFFY
FORM FACTOR
- Micro-ATX Size, 244mm*210mm
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.