CPU
- Socket AM3 socket for AMD Phenom II processors
- Support 95W Phenom II X6 processors
- High-performance HyperTransport 3.0 CPU Interface
- Support transfer rate up to 5200 mega-transfers per second
- Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.
CHIPSET
- AMD 785G & AMD SB710
- North Bridge: AMD 785G
- South Bridge: AMD SB710
GRAPHICS
- Integrated DirectX10.1 graphics processor
- Share Memory: Maximum up to 512MB
MEMORY
- Dual-channel DDR3 memory architecture
- 4 x 240-pin DDR3 DIMM socket support up to 32GB per one DIMM support 8GB
- Support DDR3 OC1600/1333/1066/800 DDR3 SDRAM
- *(Due to the DRAM maximum size is 2GB at present, the memory maximum size we have tested is 4GB)
- *(Due to AMD CPU spec limitation, please refer to Memory QVL for more information)
EXPANSION SLOT
- 1 x PCI Express x16 slot
- 2 x PCI Express x1 slots
- 3 x PCI slots
STORAGE
- Support by AMD SB710
- 2 x Ultra DMA133/100/66 devices
- 5 x Serial ATA 3.0Gb/s devices
- 1 x eSATA
- RAID0, RAID1, RAID10 configuration
AUDIO
- Realtek ALC 888S supports 8-channel HD audio
- Realtek ALC662 6-channel HD Audio codec(optional)
- Compliant with HD audio specification
LAN
- RealTek 8111DL Gigabit Fast Ethernet
REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x D-sub(VGA)
- 1 x DVI connector
- 1 x RJ45 LAN connector
- 1 x Audio port (1x Line in, 4x Line out, 1x Optical SPDIF Out)
- 1 x External SATA port
- 6 x USB ports
INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4pin CPU_FAN connectors
- 1 x 3-pin NB_FAN connector
- 1 x 3-pin SYS_FAN connector
- 1 x Power on button
- 1 x Reset button
- 1 x IDE connector
- 1 x Speaker header
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x Clear CMOS button
- 1x CD in header
- 5 x Serial ATA connectors
- 3 x USB 2.0 headers support additional 6 USB ports
- 1 x 4-pin 12V Connector
- 1 x Chassis intrusion header
- 1X Power on LED (Green light)
- 1X Stand by LED (Red Light)
SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Supports ACPI & DMI
- Supports CPU FSB adjustment, increase of 1MHz
- Supports PCI interrupt selection
- Audio, LAN, can be disabled in BIOS
- F11 hot key for boot up devices option
- Support over-clocking
- Support Page Up clear CMOS Hotkey
- Support ECS M.I.B II Utility
- CPU voltage adjustable
- Memory voltage adjustable
- NB Chipset Voltage Adjustable
- SB Chipset Voltage Adjustable
- External Clock Adjustable
- Multiple Frequency Adjustable
FORM FACTOR
- ATX Size, 305mm*220mm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
- Socket AM3 socket for AMD Phenom II processors
- Support 95W Phenom II X6 processors
- High-performance HyperTransport 3.0 CPU Interface
- Support transfer rate up to 5200 mega-transfers per second
- Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.
CHIPSET
- AMD 785G & AMD SB710
- North Bridge: AMD 785G
- South Bridge: AMD SB710
GRAPHICS
- Integrated DirectX10.1 graphics processor
- Share Memory: Maximum up to 512MB
MEMORY
- Dual-channel DDR3 memory architecture
- 4 x 240-pin DDR3 DIMM socket support up to 32GB per one DIMM support 8GB
- Support DDR3 OC1600/1333/1066/800 DDR3 SDRAM
- *(Due to the DRAM maximum size is 2GB at present, the memory maximum size we have tested is 4GB)
- *(Due to AMD CPU spec limitation, please refer to Memory QVL for more information)
EXPANSION SLOT
- 1 x PCI Express x16 slot
- 2 x PCI Express x1 slots
- 3 x PCI slots
STORAGE
- Support by AMD SB710
- 2 x Ultra DMA133/100/66 devices
- 5 x Serial ATA 3.0Gb/s devices
- 1 x eSATA
- RAID0, RAID1, RAID10 configuration
AUDIO
- Realtek ALC 888S supports 8-channel HD audio
- Realtek ALC662 6-channel HD Audio codec(optional)
- Compliant with HD audio specification
LAN
- RealTek 8111DL Gigabit Fast Ethernet
REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x D-sub(VGA)
- 1 x DVI connector
- 1 x RJ45 LAN connector
- 1 x Audio port (1x Line in, 4x Line out, 1x Optical SPDIF Out)
- 1 x External SATA port
- 6 x USB ports
INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4pin CPU_FAN connectors
- 1 x 3-pin NB_FAN connector
- 1 x 3-pin SYS_FAN connector
- 1 x Power on button
- 1 x Reset button
- 1 x IDE connector
- 1 x Speaker header
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x Clear CMOS button
- 1x CD in header
- 5 x Serial ATA connectors
- 3 x USB 2.0 headers support additional 6 USB ports
- 1 x 4-pin 12V Connector
- 1 x Chassis intrusion header
- 1X Power on LED (Green light)
- 1X Stand by LED (Red Light)
SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Supports ACPI & DMI
- Supports CPU FSB adjustment, increase of 1MHz
- Supports PCI interrupt selection
- Audio, LAN, can be disabled in BIOS
- F11 hot key for boot up devices option
- Support over-clocking
- Support Page Up clear CMOS Hotkey
- Support ECS M.I.B II Utility
- CPU voltage adjustable
- Memory voltage adjustable
- NB Chipset Voltage Adjustable
- SB Chipset Voltage Adjustable
- External Clock Adjustable
- Multiple Frequency Adjustable
FORM FACTOR
- ATX Size, 305mm*220mm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
- CATEGORY:
- Other Drivers & Tools
- COMPATIBLE WITH:
- Windows XP
Windows Vista
Windows XP 64 bit
Windows Vista 64 bit
Windows 7
Windows 7 64 bit - file size:
- 51.1 MB
- filename:
- 2_16am_RAIDXpert.zip