Sanoxy WA-U150B/WA-U150W WLAN Adapter Driver for Vista

WA-U150B and WA-U150W Technical Specifications:

Wireless Standards
- IEEE 802.11n (draft)
- IEEE 802.11g
- IEEE 802.11b

Host Interface
- High speed USB2.0/1.1 interface

Data Rate
- 802.11n: up to 150Mbps (downlink) and 150Mbps (uplink)
- 802.11g: 54 / 48 / 36 / 24 / 18/ 12 / 9 / 6 Mbps auto fallback
- 802.11b: 11 / 5.5 / 2 / 1 Mbps auto fallback

Frequency Band
- 2.4GHz ISM (Industrial Scientific Medical) Band

Chipset
- Realtek

RF Frequency
- 2412 ~ 2462 MHz (North America)
- 2412 ~ 2472 MHz (Europe)
- 2412 ~ 2484 MHz (Japan)

Radio Channel
- 1 ~ 14 channels (Universal Domain Selection)

Range Coverage
- Up to 3 times farther range than 802.11g

Antenna type
- Integrated Antenna

Roaming
- Full mobility and seamless roaming from cell to cell

RF Output Power
- 13 ~17 dBm (Typical)

Modulation
- 11n: BPSK, QPSK, 16QAM, 64QAM with OFDM
- 11g: BPSK, QPSK, 16QAM, 64QAM, OFDM
- 11b: DQPSK, DBPSK, DSSS, CCK

Data Security
- 64/128-bit WEP Encryption
- WPA, WPA-PSK, WPA2, WPA2-PSK. TKIP/AES

Network
- Auto-switch to use 802.11n or 802.11g or 802.11b mode
- Supports Ad-Hoc, Infrastructure WLAN network
- Wireless roaming
- Data rate auto fall-back under noisy environment or longer range distance
- Site Survey with Profile function

Configuration & Management
- Plug-and-Play setup and installation
- Management Utility supports 2000 / XP/ Vista

Media Access Control
- CSMA/CA with ACK

LED Indicator
- Link/Active ( Green )

Operating System
- Windows 2000, XP 32/64-bit, Vista 32/64-bit，
- Linux and MAC OS X

Environment
- Operating Temperature: 0oC to 40oC
- Storage Temperature: -20oC to 75oC
- Operating Humidity: 10% ~ 90% (Non Condensing)
- Storage Humidity: 5% ~ 95% (Non Condensing)

Compliant
- FCC (USA)
- CE Mark (Europe)
- RoHS Compliant
- Wi-Fi Compliant


It is highly recommended to always use the most recent driver version available.

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.