Gigabyte GA-G41MT-S2PT (rev. 2.0) Realtek LAN Driver 7.046 for Windows 7

Specifications:

CPU:

- Support for an Intel Core 2 Extreme processor/Intel Core 2 Quad processor/Intel Core 2 Duo processor/Intel Pentium processor/Intel Celeron processor in the LGA775 package
- L2 cache varies with CPU

Front Side Bus:

- 1333/1066/800 MHz FSB

Chipset:

- North Bridge: Intel G41 Express Chipset
- South Bridge: Intel ICH7

Memory:

- 2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory
- Dual channel memory architecture
- Support for DDR3 1333 (O.C.)/1066/800 MHz memory modules

Onboard Graphics:

- 1 x D-Sub port

Audio:

- VIA audio codec
- High Definition Audio
- 2/4/5.1/7.1-channel

LAN:

- 1 x Realtek RTL8111E chip (10/100/1000 Mbit)

Expansion Slots:

- 1 x PCI Express x16 slot, running at x16
- 1 x PCI Express x1 slot
- 2 x PCI slots

Storage Interface:

- 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices

USB:

- Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

Internal I/O Connectors:

- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x IDE connector
- 4 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x front panel audio header
- 2 x USB 2.0/1.1 headers
- 1 x clearing CMOS jumper

Back Panel Connectors:

- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x parallel port
- 1 x serial port
- 1 x D-Sub port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In/Line Out/Microphone)

I/O Controller:

- iTE IT8720/IT8718 chip

H/W Monitoring:

- System voltage detection
- CPU temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU fan speed control

Form Factor:

- Micro ATX Form Factor; 24.4cm x 19.4cm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.