ASUS P8B75-V Realtek LAN Driver 5.790/7.075/8.010/8.019

Specifications:

CPU:
- Intel Socket 1155 for 3rd/2nd Generation Core i7/Core i5/Core i3/Pentium/Celeron Processors
- Supports Intel 22 nm CPU
- Supports Intel 32 nm CPU
- Supports Intel Turbo Boost Technology 2.0

Chipset:

- Intel B75

Memory:

- 4 x DIMM, Max. 32GB, DDR3 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1600 / 1333 / 1066 MHz Non-ECC, Un-buffered Memory
- Dual Channel Memory Architecture
- Supports Intel Extreme Memory Profile (XMP)

Graphics:

- Integrated Graphics Processor
- Multi-VGA output support: DVI/RGB ports
- Supports DVI with max. resolution 1920 x 1200 @ 60 Hz
- Supports RGB with max. resolution 2048 x 1536 @ 75 Hz
- Maximum shared memory of 1696 MB
- Supports Intel HD Graphics

Multi-GPU Support:

- Supports AMD Quad-GPU CrossFireX Technology

Expansion Slots:

- 1 x PCIe 3.0/2.0 x16 (blue)
- 1 x PCIe 2.0 x16 (x4 mode, black)
- 2 x PCIe 2.0 x1
- 3 x PCI

Storage:

- Intel B75 chipset
- 1 x SATA 6Gb/s port(s), gray
- 5 x SATA 3Gb/s port(s), blue
- Supports Intel Rapid Start Technology, Intel Smart Connect Technology

LAN:

- Realtek 8111E , 1 x Gigabit LAN Controller(s)

Audio:

- Realtek ALC887-VD2 8-Channel High Definition Audio CODEC
- Supports: Jack-detection, Multi-streaming, Front Panel Jack-retasking
- Optical S/PDIF out port(s) at back panel

USB Ports:

- Intel B75 chipset: 4 x USB 3.0 port(s) (2 at back panel, blue, 2 at mid-board)
- Intel B75 chipset: 8 x USB 2.0 port(s) (4 at back panel, black, 4 at mid-board)

Back I/O Ports:

- 1 x PS/2 keyboard (purple)
- 1 x PS/2 mouse (green)
- 1 x DVI
- 1 x D-Sub
- 1 x LAN (RJ45) port(s)
- 2 x USB 3.0
- 4 x USB 2.0
- 3 x Audio jack(s)

Internal I/O Ports:

- 1 x USB 3.0 connector(s) support(s) additional 2 USB 3.0 port(s)
- 2 x USB 2.0 connector(s) support(s) additional 4 USB 2.0 port(s)
- 1 x COM port(s) connector(s)
- 1 x SATA 6Gb/s connector(s)
- 5 x SATA 3Gb/s connector(s)
- 1 x CPU Fan connector(s)
- 2 x Chassis Fan connector(s)
- 1 x S/PDIF out header(s)
- 1 x 24-pin EATX Power connector(s)
- 1 x 8-pin ATX 12V Power connector(s)
- 1 x parallel port connector(s)
- 1 x Front panel audio connector(s) (AAFP)
- 1 x System panel(s)
- 1 x MemOK! button(s)
- 1 x Clear CMOS jumper(s)

Form Factor:

- ATX Form Factor
- 12 inch x 8.6 inch ( 30.5 cm x 21.9 cm )

About Ethernet:

Windows platforms generally apply a generic driver that allows motherboards to recognize the Ethernet component.

However, in order to make use of all network card (adapter) features, you must install a proper LAN driver that enables the hardware. This task enables systems to connect to a network, as well as collect all component characteristics such as manufacturer and chipset.

If you intend to update the driver version, know that this process can add support for new OSes, fix different compatibility problems, resolve related errors encountered during the product’s lifetime, as well as include various other changes.

When it comes to the actual installation procedure, we should note that most producers try to make it as easy as possible, so following the steps should be a breeze: just get the downloadable package, run the setup, and follow the on-screen instructions.

There is a chance that other OSes could also be suitable, but it is not advisable that you install this release on platforms other than the specified ones. Remember to perform a system reboot once done, to allow all changes to take effect properly.

Therefore, if you wish to apply this version, click on the download button and enable your network card. To stay up to speed with the latest updates, check back with our website as often as possible.