D-Link DIR-850L Cloud Router Firmware 1.03

Specifications:

Standards:
- 2.4GHz: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
- 5GHz: IEEE 802.11ac (draft), IEEE 802.11n, IEEE 802.11a
- LAN/WAN: IEEE 802.3u, IEEE 802.3ab

Physical Interfaces:
- 4 Gigabit Ethernet Ports
- 1 Gigabit WANPort
- USB 3.0
- WPS Push Button
- Reset Button

Antenna Type:
- Internal Smart Antennas

Ethernet Interface:
- 4 10/100/1000 Gigabit Ethernet Ports
- 1 10/100/1000 Gigabit WAN Port

Security:
- Wi-Fi Protected Access (WPA/WPA2)
- WPS

Advanced Firewall Features:
- Network Address Translation (NAT)
- Stateful Packet Inspection (SPI)

LEDs:
- Power/WPS
- Internet

Power:
- DC 12V/3A

Mobile Apps:
- SharePort Plus
- SharePort Mobile
- mydlink Cloud Management
- QRS Mobile

Advanced Features:
- VPN pass through
- Guest Zone Support
- UPnP Support
- Wi-Fi WMM Quality of Service
- SharePort Web Access
- Parental Control
- IPv6

Operating Temperature:
- 30º to 104º F (0º to 40º C)

Operating Humidity:
- 10% to 95% non-condensing

Certifications:
- FCC
- IC
- Wi-Fi Certified
- CE

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.