Jmicron JMB36x/JMB37x Driver R1.17.25.01 WHQL

last update:
October 5th, 2007, 13:15 GMT
developed by:
Jmicron
file size:
3.8 MB
category:
C: \ Motherboard \ Jmicron
platform
Windows 2K / XP / 2003 / Vista

Specifications:

Overview
JMB360 is a single chip, one-lane PCI Express to one-port Serial ATA II Host Controller. The JMB360 is designed to provide one-port SATA II connectivity. The JMB360 supports both AHCI and Legacy IDE controller to increase system feasibility, including Native Command Queuing (NCQ), Hot Plugging, ATAPI Device Supporting, Port Multiplier with Command-based Switching Supporting, Programmable Output Swing Control to fit SATA II Gen1m and Gen2m (External SATA Connection, eSATA). It features PCI Express bus and Serial ATA II interface to express high performance storage devices.




Feature
Compliance
■ Compliant with Serial ATA AHCI (Advanced Host Controller Interface) Spec. Reversion 1.0
■ Compliant with Bus Master Programming interface for IDE ATA Controllers Revision 1.0
■ Compliant with PCI Express Base Spec. Revision 1.0a
■ Compliant with Serial ATA High Speed Serialized AT Attachment Spec. Revision 1.0a
■ Compliant with Serial ATA II: Extensions to Serial ATA 1.0a Revision 1.1
■ Compliant with Gen1m and Gen2m Serial ATA II: Electrical Spec. Revision 1.0




Overall
■ Integrated 1-Lane PCI Express PHY and 1-port SATA II PHY
■ Integrated two PLL for both PCI Express bus and SATA II interface
■ Output swing control and Automatic impedance calibration for both PCI Express and SATA II PHY
■ Supports up to 64K Byte external flash for BIOS expansion
■ Supports a slave SMBus interface (follow System Management Bus Specification Revision 1.1)
■ Fabricated 0.18um/3.3V UMC CMOS Standard Logic Process with 1.8V and 3.3V
■ Available in 48-pin and 100-pin LQFP package




PCI Express
■ Supports 1-Lane 2.5Gbps PCI Express bus
■ Native design between PCI Express and SATA II
■ All registers accessible in unified memory space


SATA II
■ Supports 1-port 3.0Gbps SATA II interface
■ Supports Native Command Queue (NCQ) on SATA II port
■ Supports Hot Plugging like USB on SATA II port
■ Supports SATA II Gen1m and Gen2m (External SATA Connection, eSATA)
■ Supports Port Multiplier with Command-based Switching on SATA II port



It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
 

In a hurry? Add it to your Download Basket!

 

It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

11,785 DOWNLOADS

Driver Finder:

KEYWORDS
DEVICE TYPE
Any
  • Any
  • Graphics Board
  • Other Drivers & Tools
  • Digital Camera / Webcam / Camcorder
  • Sound Card
  • Printer / Scanner
  • Modem
  • Network Card
  • Keyboard & Mouse
  • Joystick, Gamepad & Wheels
  • Monitor
  • BIOS
  • TV Tuner / Capture Card
  • Motherboard
  • Firmware
  • Mobile Phones
  • Card Readers
  • Bluetooth
  • HDD / SSD / NAS / USB Flash
  • TV / HDTV / Projectors
  • DVD / Blu-Ray / Media Players
  • Router / Switch / AP
  • VoIP
  • Tablets
BRAND
Choose device type first
    LAST UPDATE
    Doesn't matter
    • Doesn't matter
    • 3 months
    • 6 months
    • 12 months
    • 24 months
     
    GO