ECS GF8100VM-M3 (V1.0) Nvidia Chipset Driver 11.1.0.30 for XP

CPU
- AMD PhenomII / Phenom processor (Socket AM2+)
- AMD Athlon 64 X2 Dual Core/ Athlon 64 / Sempron processor
- High-performance HyperTransport 3.0 CPU Interface
- Support transfer rate up to 5200 mega-transfers per second
- Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.
- AM3 Ready

CHIPSET
- NVIDIA GeForce 8 Series

GRAPHICS
- On Chip ( NVIDIA GeForce8100 based with 2D/3D graphic engine)
- Integrated DirectX 10 graphics processor
- Share Memory: Maximum up to 512MB

MEMORY
- Dual-channel DDR2 1066 memory architecture
- 4 x 240-pin DDR2 DIMM socket support up to 32GB*
- Support DDR2 1066/800/667/533/400 DDR2 SDRAM *

EXPANSION SLOT
- 1 x PCI Express x16 Gen2.0 slot (Support Hybrid SLI)
- 2 x PCI Express X 1 Gen1.1 slot
- 1 PCI

STORAGE
- Support by NVIDIA GeForce8100
• 2 x Ultra DMA133/100/66 devices
• 6 x Serial ATA 3.0Gb/s devices
- RAID0, RAID1, RAID0+1, RAID5 configuration

AUDIO
- IDT 92HD206 (Co-lay 92HD202)
- Compliant with 8CH HD audio specification

LAN
- Realtek 8211B Gigabit Lan PHY

REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x VGA port
- 1 x COM Port
- 1 x DVI connector
- 6 x USB 2.0 ports
- 1 x Ethernet Port
- 1 x Audio port (Line-in, Line-out, Mic-in)

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4-pin ATX 12V connector
- 1 x 4pin CPU_FAN connectors
- 1 x 3-pin SYS_FAN connector
- 1 x IDE connector
- 1 x FDD connector
- 1 x LPT header
- 6 x Serial ATA 3Gb/s connectors
- (SATA5 & 6 only can work under AHCI or RAID mode due to NVIDIA chipset limitation)
- 1 x Speaker header
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x SPDIF out header
- 1x CD in header
- 3 x USB headers
- 1 x CLR COMS

SYSTEM BIOS
- AMI BIOS with 8Mb SPI ROM
- Supports Plug and Play, STR/STD, Hardware monitor, Multi Boot, DMI
- Supports ACPI revision 3.0 specification

FORM FACTOR
- Micro-ATX Size, 244mm*244mm