ASRock FM2A88X Extreme6+ ASMedia USB 3.0 Driver 1.16.12.0

Specifications:

CPU
- Supports Socket FM2+ 95W / FM2 100W processors
- Digi Power design
- 8 + 2 Power Phase design

Chipset
- AMD A88X (Bolton-D4)

Memory
- Dual Channel DDR3 Memory Technology
- 4 x DDR3 DIMM Slots
- Supports DDR3 2600+(OC)/2400(OC)/2133/1866/1600/1333/1066 non-ECC, un-buffered memory
- Max. capacity of system memory: 64GB
- Supports Intel Extreme Memory Profile (XMP) 1.3 / 1.2
- Supports AMD Memory Profile (AMP)
DDR3 2600+ is only supported with two DIMMs.

BIOS
- 2 x 64Mb AMI UEFI Legal BIOS with multilingual GUI support (1 x Main BIOS and 1 x Backup BIOS)
- Supports Secure Backup UEFI Technology
- Supports "Plug and Play"
- ACPI 1.1 Compliant wake up events
- Supports jumperfree
- SMBIOS 2.3.1 support
- DRAM, VDDP, VDDR Voltage multi-adjustment

Graphics
- Integrated AMD Radeon HD 8000/7000 series graphics in A-series APU
- DirectX 11.1, Pixel Shader 5.6 with FM2+ CPU. DirectX 11, Pixel Shader 5.0 with FM2 CPU.
- Max. shared memory 2GB
- Multi VGA Output options: D-Sub, DVI-D, HDMI and DisplayPort Ports
- Supports Quad Monitor with FM2+ CPU. Supports Triple Monitor with FM2 CPU.
- Supports HDMI Technology with max. resolution up to 1920x1200 @ 60Hz
- Supports Dual-link DVI-D with max. resolution up to 2560x1600 @ 60Hz
- Supports D-Sub with max. resolution up to 1920x1200 @ 60Hz
- Supports DisplayPort 1.2 with max. resolution up to 4K x 2K (4096x2400) @ 60Hz or 4K x 2K (4096x2160) @ 60Hz
- Supports DP++
- Supports Multi-Streaming
- Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and HBR (High Bit Rate Audio) with HDMI Port (Compliant HDMI monitor is required)
- Supports Blu-ray Stereoscopic 3D with HDMI Port
- Supports AMD Steady Video 2.0: New video post processing capability for automatic jitter reduction on home/online video
- Supports HDCP with DVI-D, HDMI and DisplayPort Ports
- Supports Full HD 1080p Blu-ray (BD) playback with DVI-D, HDMI and DisplayPort Ports

Audio
- 7.1 CH HD Audio with Content Protection (Realtek ALC1150 Audio Codec)
- Premium Blu-ray Audio support
- Supports Purity Sound
- 115dB SNR DAC with differential amplifier
- TI NE5532 Premium Headset Amplifier (Supports up to 600 ohm headsets)
- Direct Drive Technology
- EMI shielding cover
- PCB isolate shielding
- Supports DTS Connect

LAN
- PCIE x1 Gigabit LAN 10/100/1000 Mb/s
- Qualcomm Atheros AR8171
- Supports Qualcomm Atheros Security Wake On Internet Technology
- Supports Wake-On-LAN
- Supports Energy Efficient Ethernet 802.3az
- Supports PXE

Slots
- 2 x PCI Express 3.0 x16 Slots (PCIE2/PCIE4: single at x16 (PCIE2); dual at x8 (PCIE2) / x8 (PCIE4))
- 1 x PCI Express 2.0 x16 Slot (PCIE5 @ x4 mode)
- 2 x PCI Express 2.0 x1 Slots
- 2 x PCI Slots
- Supports AMD Quad CrossFireX, 3-Way CrossFireX, CrossFireX and Dual Graphics
PCIE 3.0 is only supported with FM2+ CPU. With FM2 CPU, it only supports PCIE 2.0.

Storage
- 7 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0, RAID 1, RAID 5 and RAID 10), NCQ, AHCI and Hot Plug

Connector
- 1 x IR Header
- 1 x COM Port Header
- 1 x Chassis Intrusion Header
- 1 x Power LED Header
- 2 x CPU Fan Connectors (1 x 4-pin, 1 x 3-pin)
- 3 x Chassis Fan Connectors (1 x 4-pin, 2 x 3-pin)
- 1 x Power Fan Connector (3-pin)
- 1 x 24 pin ATX Power Connector
- 1 x 8 pin 12V Power Connector
- 1 x XFire Power Connector
- 1 x Front Panel Audio Connector
- 3 x USB 2.0 Headers (Support 6 USB 2.0 ports)
- 1 x USB 3.0 Header by AMD A88X (Bolton-D4) (Supports 2 USB 3.0 ports)
- 1 x Dr. Debug with LED
- 1 x Power Switch with LED
- 1 x Reset Switch with LED
- 1 x BIOS Selection Switch

Rear Panel I/O
- 1 x PS/2 Mouse/Keyboard Port
- 1 x D-Sub Port
- 1 x DVI-D Port
- 1 x HDMI-Out Port
- 1 x HDMI-In Port
- 1 x DisplayPort
- 1 x Optical SPDIF Out Port
- 2 x USB 2.0 Ports
- 1 x eSATA Connector
- 2 x USB 3.0 Ports (AMD A88X (Bolton-D4))
- 2 x USB 3.0 Ports (ASMedia ASM1042)
- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)
- HD Audio Jacks: Rear Speaker / Central / Bass / Line in / Front Speaker / Microphone

This package contains the files needed for installing the ASMedia USB Host Controller driver. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified.

To install the driver, proceed as follows

- Save the downloadable file.
- Install from setup program: Double click the setup.exe and follow the setup wizard steps to install the Asmedia USB Host controller driver

Silent Install/Uninstall:

- All dialogue box will not display when Silent Install/Uninstall
- install:setup.exe /s /v/qn
- uninstall:setup.exe /s /x /v/qn
- Notes: Flags and their parameters are not case-sensitive.

VERIFYING INSTALLATION:

- On the Start menu, select 'Control Panel'
- Open on the 'System' applet (you may first have to select 'Switch to Classic View')
- Select the 'Hardware' tab
- Select the 'Device Manager' button.
- Expand the 'Universal Serial Bus Controllers' entry
- Right-click on 'ASMedia USB3.0 eXtensible Host Controller' or 'ASMedia USB3.1 eXtensible Host Controller'
- Select 'Properties'
- Select the 'Driver' tab
- Select the 'Driver Details' button
- The software version is displayed after 'Driver Version'

UNINSTALLING THE SOFTWARE:

- Removal from the system will render any USB devices inaccessible by the operating system; therefore, uninstallation procedure will only uninstall non-critical components of this software (user interface, start menu links, etc.).
- Go to "Start"
- Select "Control Panel"
- Select "Add or Remove Programs"
- Find "Asmedia USB Host Controller Driver", select it and click the "Remove" button.
- The uninstall program will start. Click through the options for the uninstallation.

About USB Drivers:

Windows operating systems automatically apply a generic driver that allows users to transfer files using the USB (Universal Serial Bus) port; however, installing the appropriate software can bring about significant changes.

If the proper USB software is installed, systems will benefit from improved compatibility with different devices, numerous fixes regarding USB issues, and various other changes that can increase transfer speed with external storage drives.

When it comes to the installation steps, simply check to make sure that the download record is compatible with your system characteristics, get the package, run the setup, and follow the on-screen instructions for a complete update.

Bear in mind that even though other OSes might be compatible, it would be best if you applied this package only on specified platforms. In addition to that, as technology evolves from one day to another, we recommended that you always use the latest software available.

That being said, click the download button, get and apply the present version and enjoy your newly updated system. Also, constantly check back with our website to find out when a new version is available.