• 64bit AMD Phenom II X6/X4/X3/X2, Athlon II X4/X3/X2 and Sempron CPU.
Please refer to CPU Support for compatible CPU; the above description is for reference only.
Hyper Transport Bus
• HyperTransport 3.0 supporting speed up to 5200MT/s
Chipset
• AMD 880G and SB710 Chipset
Main Memory
• Supports four unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333/1600* (OC) DRAM, 16GB Max
Slots
• 1 PCI Express x16 slot with x16 operation (PCI Express Bus SPEC V2.0 compliant)
• 3 PCI EXpress x1 slots
• 2 PCI slots, support 3.3V/ 5V PCI bus Interface.
On-Board IDE
• One IDE port by AMD SB710
- Supports Ultra DMA 66/100/133 mode
- Supports PIO, Bus Master operation mode
- Can connect up to two IDE devices
On-Board SATA
• 5 SATA II (1~5) ports by AMD SB710
• 1 eSATA port by AMD SB710
- Supports storage and data transfers at up to 3Gb/s
RAID Function
- SATA II 1~5 support RAID 0, 1, 10, JBOD mode by AMD SB710
MSI Reminds You...
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.
Audio
• Chipset integrated by Realtek ALC888S/ACL889
- Flexible 8-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec
LAN
• Realtek PCI-E GbLAN controller RTL8111DL
- Supports 10Mb/s, 100Mb/s and 1000Mb/s
- Compliance with PCI-Express Bus specification v1.0a
IEEE1394 / FireWire
• Chipset integrated by VIA VT6315N
- Transfer rate is up to 400Mbps
Internal I/O Connectors
- 1 x ATX 24-pin power connector
- 1 x ATX 4-pin 12V CPU power connector
- CPU x 1 / System x 3 FAN connectors
- 1 x Front panel audio connector
- 1 x Front panel connector
- 1 x Chassis intrusion switch connector
- 3 x USB 2.0 connectors
- 5 x Serial ATA II connectors
- 1 x IEEE1394 port
- 1 x ATA133 HD connector
- 1 x Serial port connector
- 1 x OC Switch
- 1 x Power LED button
- 1 x Reset LED button
- 1 x Clear CMOS button
- 1 x SPDIF-out connector
- 1 x TPM module connector
Back Panel I/O Ports
- 1 x PS/2 keyboard or mouse
- 1 x 6 in 1 audio jack
- 6 x USB 2.0 ports
- 1 x RJ45 LAN jack
- 1 x optical SPDIF-out port
- 1 x eSATA port
- 1 x DVI-D port
- 1 x Graphic Card port
- 1 x HDMI port
- 1 x IEEE1394 port
Dimension
• 30.5cm(L) x 24.4cm(W) ATX Form Factor
About Chipset Driver:
Windows OS automatically installs a generic driver that allows computers to recognize basic motherboard functions. However, to make use of all board components, appropriate chipset drivers must be applied.
If you install this package, the system will receive related information regarding the chipset. Also, this step might improve compatibility and bus transfer speeds, add various changes for sleep state behavior, power saving functionality and others, or include support for new features.
To apply this release, simply make sure your system configuration is supported by this package, get the file, run the available setup, and follow the on-screen instructions. Bear in mind that installing inappropriate chipset drivers can cause computers to malfunction.
In addition to that, do perform a system restart after you have completely applied the present release so that all changes take effect. Despite the off-chance that other OSes might be compatible, we do not recommend installing any software on platforms other than the highlighted ones.
That being said, check the supported platforms, click the download button and apply the chipset driver. Moreover, don’t forget to check with our website as often as possible to stay up to date with the latest releases.
- CATEGORY:
- Motherboard
- COMPATIBLE WITH:
- Windows XP
Windows Vista
Windows XP 64 bit
Windows Vista 64 bit
Windows 7
Windows 7 64 bit - file size:
- 331 MB
- filename:
- ati_system_drive_mb.zip