Intel SSD Data Center Tool 2.2.4

  n/a
Manufacturer:

Description

DOWNLOAD NOW

Data Center Tool Highlights:

- This version adds a new firmware update for the Intel SSD DC S3710, DC S3610, DC S3510, DC S3500 M.2 and DC S3500 HD Series. For all above listed products, the latest firmware revision is G2010140.

Intel Solid-State Drive DC S3710, DC S3610 and DC S3510 Series Revision G2010140:

This firmware revision has several continuous improvement optimizations intended to provide the best possible user experience with the Intel SSD.

The following issues are also fixed in this release:

- Added support for SMART Attribute F3h
- Modification to Secure Erase to include NAND Erase
- Improvements to the Maximum Latency for all Sequential and Random Write workloads
- Added a fourth PHY mode setting to accommodate long interconnects (> 8-inches)

Intel Solid-State Drive DC S3500 Series Revision G2010140:

Only applicable for the Intel SSD DC S3500 M.2 and DC S3500 HD Series.

This firmware revision has several continuous improvement optimizations intended to provide the best possible user experience with the Intel SSD.

The following issues are also fixed in this release:

- Added support for SMART Attribute F3h
- Modification to Secure Erase to include NAND Erase
- Improvements to the Maximum Latency for all Sequential and Random Write workloads
- Added a fourth PHY mode setting to accommodate long interconnects (> 8-inches)

The Intel SSD Data Center Tool supports the following Intel SSDs:

- Intel SSD 750 Series
- Intel SSD DC P3500 Series
- Intel SSD DC P3600 Series
- Intel SSD DC P3700 Series
- Intel SSD DC S3500 Series
- Intel SSD DC S3510 Series
- Intel SSD DC S3610 Series
- Intel SSD DC S3700 Series
- Intel SSD DC S3710 Series

HELPFUL NOTES:

- The Intel SSD Data Center Tool incorporates a help screen providing additional information for each command.
- Use of the tool under Windows operating systems requires administrator access by right clicking on the Command Prompt icon and selecting "Run as Administrator".

About Intel Solid-State Drive Data Center Tool:

The Intel SSD DCT is a drive management tool for Intel SSD Data Center Family of products, providing the following key features for both Intel SATA and Intel PCIe drives:
- Detecting Intel SSD Data Center PCIe NVMe and SATA devices attached to a host system
- Parsing a drive's Identify Device information
- Parsing a drive's SMART (Self-Monitoring and Reporting Technology) information
- Resizing the SSD's usable storage capacity by changing its maximum LBA setting
- Updating SSD firmware
- The tool carries a firmware payload for all supported drives
- When drive information is displayed, the tool will indicate if a new firmware is available
- The tool does not update firmware on Engineering Sample (ES) drives
- Calculating drive life expectancy (Endurance Analyzer feature)
- Setting the Power Governor Mode (vendor unique feature).

Three Modes are supported:

- Mode 0: 25-watts for NVMe devices; Unconstrained for ATA devices
- Mode 1: 20-watts for NVMe devices; Typical (7-watts) for ATA devices
- Mode 2: 10-watts for NVMe devices; Low (5-watts) for ATA devices

About SSD Toolbox:

The Solid State Drive (SSD) Toolbox is an update utility that properly recognizes the SSD unit(s) installed on your system. It also displays various pieces of information regarding the connected storage devices and searches for a new suitable firmware version.

However, before you consider downloading this version, carefully read the release notes for changes that can apply to your SSD. Once you have updated your drive, reboot to make sure that all modifications take effect.

When it comes to installing this software, the steps are very easy because all you have to do is get the downloadable package (extract it if necessary) and run the available setup. Once the installation is complete, run the Toolbox and follow the instructions for updating the SSD.

That being said, make sure this Toolbox version has a new firmware version available for your solid state drive and, if so, hit the download button, and install the software. Otherwise, check with our website as often as possible so that you don’t miss the release that can improve your SSD.

Intel SSD DCT Intel Solid-State Drive DCT Intel Solid-State Drive Data Center Tool Solid-State Drive Data Center Tool Intel SSD

  CATEGORY:
HDD / SSD / NAS / USB Flash
  COMPATIBLE WITH:
Windows 2008
Windows 7
Windows 7 64 bit
Windows 8
Windows 8 64 bit
Windows Server 2012
Windows 8.1
Windows 8.1 64 bit
Windows 10
Windows 10 64 bit
  file size:
10.7 MB
  filename:
DataCenterTool_2_2_4_Windows.zip
Other versions