Fixes:
- CH7511- eDP to LVDS is not working in HSW - Windows XP
- Driver not getting installed with setup.exe - on Embedded OS POSReady 2009
- Video playing with WinDVD player hangs when running along with DirectDraw app (the bouncing white box)
- HDMI is detected after Hotunplug when connected through DP2HDMI dongle through port D of eaglemont card .
- DT Specific;Furmark application hang when stress run for long duration.
- eDP+VGA(Extended and Clone mode): eDP is missing after resuming from Standby mode
- eDP+VGA(Extended and Clone mode): VGA display is corrupted(becomes blank) after resuming from Hibernate mode
- Created Profile in CUI gets applied automatically upon hotunplug/plug even if it not applied in CUI.
- DT specific: Unable to detect 2 HDMI displays using DP to HDMI dongle.
- Panel Specific: In clone mode/single mode with VGA as primary and DP/HDMI display as secondary on resuming the system from standby (S3) VGA goes blank.
- Panel Specific: Display on VGA appears to be shifted towards right in clone/single mode at 1920 x 1200 resolutions.
- VGA display appears corrupted when put in extended mode with eDP primary and
- VGA secondary after resuming the system from hibernate (S4) with eDP primary and DP secondary.
- DELA054 panel specific: VGA display does not come up in clone mode when resolution is 1920 x 1200.
- Overlay application disappears when rotated using CUI/OS Properties.
- System is getting hanged when Glsl Demo v 3.8 is ran and mode is changed from DP to DP+VGA extended.
- In clone mode with eDP as primary and VGA as secondary corruption on VGA is observed on resuming the system from S4 state.
- After trying first time rotation from OS property with overlay application running rotation doesn't happen. Need to do it second time for rotating.
- Crash observed when playing DirectDraw application in extended view.
- The system suddenly crashed/restarted in the middle of while playing the game DOOM 3
- eDP display does not boot with the timings found in the DT block in VBT
- In extended mode, system resumes intermittently from screen saver-> hibernate state on mobile
- WHQL 1.5 : HSW: DXVA Display Test (32-bit) test fails
- CH7511- eDP to LVDS is not working in HSW - Windows XP
- Driver not getting installed with setup.exe - on Embedded OS POSReady 2009
- Video playing with WinDVD player hangs when running along with DirectDraw app (the bouncing white box)
- HDMI is detected after Hotunplug when connected through DP2HDMI dongle through port D of eaglemont card .
- DT Specific;Furmark application hang when stress run for long duration.
- eDP+VGA(Extended and Clone mode): eDP is missing after resuming from Standby mode
- eDP+VGA(Extended and Clone mode): VGA display is corrupted(becomes blank) after resuming from Hibernate mode
- Created Profile in CUI gets applied automatically upon hotunplug/plug even if it not applied in CUI.
- DT specific: Unable to detect 2 HDMI displays using DP to HDMI dongle.
- Panel Specific: In clone mode/single mode with VGA as primary and DP/HDMI display as secondary on resuming the system from standby (S3) VGA goes blank.
- Panel Specific: Display on VGA appears to be shifted towards right in clone/single mode at 1920 x 1200 resolutions.
- VGA display appears corrupted when put in extended mode with eDP primary and
- VGA secondary after resuming the system from hibernate (S4) with eDP primary and DP secondary.
- DELA054 panel specific: VGA display does not come up in clone mode when resolution is 1920 x 1200.
- Overlay application disappears when rotated using CUI/OS Properties.
- System is getting hanged when Glsl Demo v 3.8 is ran and mode is changed from DP to DP+VGA extended.
- In clone mode with eDP as primary and VGA as secondary corruption on VGA is observed on resuming the system from S4 state.
- After trying first time rotation from OS property with overlay application running rotation doesn't happen. Need to do it second time for rotating.
- Crash observed when playing DirectDraw application in extended view.
- The system suddenly crashed/restarted in the middle of while playing the game DOOM 3
- eDP display does not boot with the timings found in the DT block in VBT
- In extended mode, system resumes intermittently from screen saver-> hibernate state on mobile
- WHQL 1.5 : HSW: DXVA Display Test (32-bit) test fails
This document refers to systems containing the following Intel chipsets/processors:
- 4th Generation Intel Core Processor Platform
- CATEGORY:
- Graphics Board
- COMPATIBLE WITH:
- Windows XP
- file size:
- 23.4 MB
- filename:
- WinXP32.zip
Other versions