CPU
- Support for Socket AM2+/ AM2 processors: AMD PhenomFX processor/ AMD Phenom processor/ AMD Athlon 64 FX processor/AMD Athlon 64 X2 Dual-Core processor/AMD Athlon 64 processor/AMD Sempron processor.
(Note) If you install AMD AM2+ CPU on AM2 motherbord, the system bus speed will downgrade from HT3.0(5200MHz) to HT1.0(2000 MT/s) spec; however, the frequency of AM2+ CPU will not be impacted. Please refer "CPU Support List" for more information.
Chipset
- North Bridge Chipset: AMD 690V
- South Bridge Chipset: AMD SB600
- Super I/O chip: ITE IT8716
- Integrated Peripherals
- - Realtek RTL8110 Gigabit Ethernet
- - Realtek ALC888 Audio Codec
Memory
- 4 DDR2 DIMM memory slots (supports up to 16GB memory)(Note 1)
- Supports dual channel DDR2 800/667/533/400 DIMMs
- Supports 1.8V DDR2 DIMMs
(Note 1) Due to the limitation of Windows 32-bit operating system, when more than 4GB of physical memory is installed, the actual memory available for the operating system will be less than 4GB; Windows 64-bit operating system doesn't have such limitation.
Internal I/O Connectors
- 1 24-pin ATX power connector
- 1 4-pin ATX 12V power connector
- 1 floppy connector
- 1 IDE connector
- 4 SATA 3Gb/s connector
- 1 CPU fan connector
- 1 system fan connector
- 1 front panel connector
- 1 front audio connector
- 1 CD In connector
- 1 SPDIF In/Out connector
- 3 USB 2.0/1.1 connector for additional 6 USB 2.0/1.1 ports by cables
- 1 COMB connector
- 1 Power LED connector
- 1 Chassis Intrusion connector
- 1 TV out connector
Expansion Slots
- 1 PCI Express x 16 slot
- 1 PCI Express x 4 slot
- 2 PCI slot
Back Panel Connectors
- 1 PS/2 keyboard port
- 1 PS/2 mouse port
- 1 parallel port
- 1 COMA port
- 1 VGA port
- 4 USB 2.0/1.1 ports
- 1 RJ-45 LAN port
- 6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear Speaker Out)/Center/Subwoofer Speaker Out/Side Speaker Out)
Power
- ATX power connector and ATX 12V connector
Form Factor
- Micro ATX form factor; 24.4cm x 24.4cm
H/W Monitoring
- System voltage detection
- CPU / System temperature detection
- CPU / System fan speed detection
- CPU / System warning temperature
- CPU fan failure warning
- Supports CPU Smart Fan function(Note 2)
(Note 2) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.
BIOS
- 1 4Mbit flash ROM
- Use of licensed AWARD BIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
Other Features
- Supports @BIOS
- Supports Download Center
- Supports Q-Flash
- Supports EasyTune (only supports Hardware Monitor function)(Note 3)
- Supports Xpress Install
- Supports Xpress Recovery2
- Supports Xpress BIOS Rescue
(Note 3) EasyTune functions may vary depending on different motherboards.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
- Support for Socket AM2+/ AM2 processors: AMD PhenomFX processor/ AMD Phenom processor/ AMD Athlon 64 FX processor/AMD Athlon 64 X2 Dual-Core processor/AMD Athlon 64 processor/AMD Sempron processor.
(Note) If you install AMD AM2+ CPU on AM2 motherbord, the system bus speed will downgrade from HT3.0(5200MHz) to HT1.0(2000 MT/s) spec; however, the frequency of AM2+ CPU will not be impacted. Please refer "CPU Support List" for more information.
Chipset
- North Bridge Chipset: AMD 690V
- South Bridge Chipset: AMD SB600
- Super I/O chip: ITE IT8716
- Integrated Peripherals
- - Realtek RTL8110 Gigabit Ethernet
- - Realtek ALC888 Audio Codec
Memory
- 4 DDR2 DIMM memory slots (supports up to 16GB memory)(Note 1)
- Supports dual channel DDR2 800/667/533/400 DIMMs
- Supports 1.8V DDR2 DIMMs
(Note 1) Due to the limitation of Windows 32-bit operating system, when more than 4GB of physical memory is installed, the actual memory available for the operating system will be less than 4GB; Windows 64-bit operating system doesn't have such limitation.
Internal I/O Connectors
- 1 24-pin ATX power connector
- 1 4-pin ATX 12V power connector
- 1 floppy connector
- 1 IDE connector
- 4 SATA 3Gb/s connector
- 1 CPU fan connector
- 1 system fan connector
- 1 front panel connector
- 1 front audio connector
- 1 CD In connector
- 1 SPDIF In/Out connector
- 3 USB 2.0/1.1 connector for additional 6 USB 2.0/1.1 ports by cables
- 1 COMB connector
- 1 Power LED connector
- 1 Chassis Intrusion connector
- 1 TV out connector
Expansion Slots
- 1 PCI Express x 16 slot
- 1 PCI Express x 4 slot
- 2 PCI slot
Back Panel Connectors
- 1 PS/2 keyboard port
- 1 PS/2 mouse port
- 1 parallel port
- 1 COMA port
- 1 VGA port
- 4 USB 2.0/1.1 ports
- 1 RJ-45 LAN port
- 6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear Speaker Out)/Center/Subwoofer Speaker Out/Side Speaker Out)
Power
- ATX power connector and ATX 12V connector
Form Factor
- Micro ATX form factor; 24.4cm x 24.4cm
H/W Monitoring
- System voltage detection
- CPU / System temperature detection
- CPU / System fan speed detection
- CPU / System warning temperature
- CPU fan failure warning
- Supports CPU Smart Fan function(Note 2)
(Note 2) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.
BIOS
- 1 4Mbit flash ROM
- Use of licensed AWARD BIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
Other Features
- Supports @BIOS
- Supports Download Center
- Supports Q-Flash
- Supports EasyTune (only supports Hardware Monitor function)(Note 3)
- Supports Xpress Install
- Supports Xpress Recovery2
- Supports Xpress BIOS Rescue
(Note 3) EasyTune functions may vary depending on different motherboards.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
- CATEGORY:
- Graphics Board
- COMPATIBLE WITH:
- Windows 2K
Windows XP
Windows 2003
Windows XP 64 bit - file size:
- 3.8 MB
- filename:
- motherboard_driver_chipset_ati_rs690.exe