Gigabyte GA-6PXSVT (rev. 1.0) aSpeed Graphics Driver 0.95.01

Specifications:

Form Factor:
- ATX
- 305W x 244D (mm)

CPU:

- Intel Xeon E5-2600 V2 processors
- Intel Xeon E5-1600 V2 processors
- Intel Xeon E5-2600 processors
- Intel Xeon E5-1600 processors
- Intel 2nd & 3rd Gen. Core i7 processors

Socket:

- 1 x LGA 2011
- Mounting pitch: narrow ILM (56x94mm)
- Recommended cooling device dimension: 70x106mm
- Max. length of M4 screw threads: 3.7mm
- Screws longer than 3.7mm might damage the motherboard

Chipset:

- Intel C602

Memory:

- 8 x DIMM slots
- Quad channel memory architecture
- ECC & non-ECC UDIMM/RDIMM modules supported
- Single and dual rank UDIMM modules up to 8GB supported
- Single, dual and quad rank RDIMM modules up to 32GB supported
- 1.35V modules: 1066/1333/(1600) MHz
- 1.5V modules: 1066/1333/1600/(1866) MHz

LAN:

- 2 x GbE LAN ports (Intel 82574L)
- 1 x 10GbE SFP+ LAN port (Intel 82599EN)

Video:

- Integrated in Aspeed AST2400
- 2D Video Graphic Adapter with PCIe bus interface
- 128MB memory
- 1920x1200@60Hz 32bpp

SATA:

- 2 x SATA III 6Gb/s supporting SATA DOM
- 8 x SATA III 6Gb/s from Marvell 88SE9230 controller
- 4 x SATA II 3Gb/s

RAID:

- Intel SATA RAID 0/1/10/5
- Marvell SATA RAID 0/1/10

Expansion Slot:

- 2 x PCIe x16 (Gen3 x16 bus) slots or (via PCIe switch)
- 1 x PCIe x16 (Gen3 x16 bus) slot
- 2 x PCIe x16 (Gen3 x8 bus) slots

Internal I/O:

- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 1 x PMBus connector
- 4 x System fan headers
- 1 x CPU fan header
- 1 x SATA SGPIO header
- 1 x SATA port 0 DOM support jumper
- 1 x SATA port 1 DOM support jumper
- 1 x BIOS upgrade ROM
- 10 x SATA III 6Gb/s ports
- 4 x SATA II 3Gb/s ports
- 1 x CMOS battery socket
- 1 x Chassis intrusion jumper
- 1 x Clear CMOS jumper
- 1 x Clear password jumper
- 1 x Front panel header
- 1 x USB 2.0 Type A connector
- 1 x Backplane board header
- 1 x BIOS recovery jumper
- 1 x BIOS write protect jumper
- 1 x USB 3.0 header
- 1 x USB 2.0 header
- 1 x Serial header
- 1 x BMC upgrade ROM
- 1 x TPM header
- 1 x LAN3 active LED
- 1 x BMC readiness LED
- 1 x ME Recovery jumper
- 1 x PCIE1 and PCIE2 bandwidth switch jumper
- 1 x PMBus select jumper
- 1 x Force to stop FRB3 timer jumper
- 1 x S3 power on select jumper

Rear I/O:

- 4 x USB 3.0
- 2 x USB 2.0
- 1 x PS/2
- 1 x Serial
- 1 x VGA
- 1 x SFP+
- 2 x RJ45
- 1 x ID button with LED

TPM:

- 1 x TPM header