PROLiNK MH8041 Multi-Homing Load Balance Broadband Router is a WAN and failover router, which can also be known as Multi-Homing SOHO gateway. It provides 4 WAN ports for ADSL or cable modem. Users can enjoy traffic load sharing and load balance of multiple ADSL/cable links, in order to avoid single link failure. It also provides many key features like VoIP Pass-Through, VPN Pass-Through, multiple DMZ-host supported, MIPS with 150MHz, dynamic DNS supported and lots more.

Product Descriptions

Features & Specifications

WAN Port

￭ 4 x 10M/100M port (4 x WAN Router) Auto-sensing (RJ45) 802.3/802.3u, Auto MDI/MDIX

LAN Port

￭ 1 x 10M/100M Auto-sensing (RJ45) 802.3/802.3u, Auto MDI/MDIX

CPU

￭ MIPS with 150MHz

Memory

￭ Flash: 2M Bytes
￭ SDRAM: 16M Bytes

Indicators

￭ LAN, WAN1, WAN2, WAN3, WAN4

Reset Switch

￭ Push to load factory default value or back to latest configuration file

Outbound Load Balance

￭ Provide 3 working modes:
◊ Session
◊ Weight round robin
◊ Traffic

Protocol

￭ TCP/IP, UDP- ARP, BOOTP, ICMP, Routing Protocol, DHCP Server/Client, FTP, TFTP, Telnet, PPPoE

VPN Pass Through

￭ IPSEC, PPTP

Routing Protocol

￭ Static Route, RIP1, RIP2

Dynamic DNS

￭ Support dyndns.org

Working Mode

￭ Router Mode:
◊ Work as router with 5 different LAN
◊ PPPoE not supported
￭ Gateway Mode:
◊ All functions enabled
￭ Basic NAT Mode:
◊ All function supported except IP packet filtering & DoS Defense

Security

￭ DMZ host
￭ Multi NAT/NAPT
￭ PAP/CHAP
￭ Virtual Server Mapping Support
￭ Internet Access Control
￭ Supports Messenger, Real Audio & Cu-See-Me

Mail Alert

￭ WAN Up, WAN Down, DoS Attack & System Log Full
￭ Support Proxy Server

System Log

￭ Local event logging

Firewall

￭ DoS (Denial of Service) Protection:
◊ Active port scan
◊ TCP SYNC flood
◊ ICMP flood
◊ IP source route option detection
◊ IP spoofing
◊ Ping of death
◊ IP fragment overlap
◊ UDP flooding
◊ Ping oversize
◊ Ping enable/disable

System Timer

￭ NTP (Network Timer Protocol)
￭ Use PC local time

DHCP Server/Client

￭ DHCP Server can reserve up to 253 IP
￭ Supports up to 512 users

Firmware Upgrade

￭ HTTP web-based download/TFTP

Configuration File

￭ Online display configuration
￭ Saves & restores configuration into PC

Remote Configure

￭ Configure router through internet

WAN IP Convert

￭ WAN port can connect to different IP domain gateway

Healthy Check

￭ Up to 4 WAN port
￭ Check WAN port link & ADSL link
￭ Automatically switch packet to well-connect line from broken line

IP Binding

￭ Specific destination IP address plus port number through dedicated WAN port

Special IP Assignment

￭ Specific destination IP or local IP address through dedicated WAN port
￭ Route path control by port number

VoIP Pass Through

￭ Supports H.323 ALG

Protocol Bandwidth Control

￭ Dynamic allocate bandwidth for specific protocol in each WAN port to avoid link congestion

QoS

￭ Limit specific application bandwidth & WAN port route path
￭ Limit specific User Bandwidth & WAN port route path

Backup & Restore

￭ Router configuration file can be backup to PC or restore to router from PC

System Data Monitor

￭ Show each WAN port bandwidth usage & traffic status

Multi-NAT

￭ User definable
￭ Up to 10 different LAN segment IP can be define at LAN port

Virtual Server

￭ Bi-direction virtual server
￭ Local virtual server pass through
￭ Support group virtual server setting mode
￭ LAN users can use WAN IP to reach virtual server

Temperature

￭ 0 ~ 40°C (operation)
￭ -10 ~ 60°C (storage)

Dimension

￭ 180mm (W) x 160mm (D) x 50mm (H)

Weight

￭ Under 600g

Humidity

￭ -10 ~ 95% RH

Certification

￭ CE, FCC


It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.