Fixes:
- The user's MAC is not added into vlan assigned by radius when "dot1x port-control mac-based" enabled
- GSM7328Sv2/GSM7352Sv2 permits to download 7.x image.
- RPS when plugged in, always shows "powering" in "show hardware.
- Show tech-support output has several errors.
- SNMP Get next response has the same object name as Get next request.
- Device ignores the IGMP membership report with Source Address as 0.0.0.0.
- Lost access to switch's management interface intermittently.
- Copying files from USB to switch is too slow.
- Sensor information looks like incorrect in buffer log.
- When stack using AX741+AXM752, stack formed but devices connected to the switch cannot communicate.
- Incorrect IfOutDiscards is incorrect when port is down.
- GSM7352S crashed when the port for default route is disconnected.
- Two GSM7328Sv2 using 15 meter CX4 cable link between them will not link
- The user's MAC is not added into vlan assigned by radius when "dot1x port-control mac-based" enabled
- GSM7328Sv2/GSM7352Sv2 permits to download 7.x image.
- RPS when plugged in, always shows "powering" in "show hardware.
- Show tech-support output has several errors.
- SNMP Get next response has the same object name as Get next request.
- Device ignores the IGMP membership report with Source Address as 0.0.0.0.
- Lost access to switch's management interface intermittently.
- Copying files from USB to switch is too slow.
- Sensor information looks like incorrect in buffer log.
- When stack using AX741+AXM752, stack formed but devices connected to the switch cannot communicate.
- Incorrect IfOutDiscards is incorrect when port is down.
- GSM7352S crashed when the port for default route is disconnected.
- Two GSM7328Sv2 using 15 meter CX4 cable link between them will not link
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
- CATEGORY:
- Firmware
- COMPATIBLE WITH:
- OS Independent
- file size:
- 8.9 MB
- filename:
- GSM7328S GSM7352S GSM7228PS GSM7252PS firmware version v8.0.3.15.zip
Other versions
OS Independent