NETGEAR GSM7228S Switch Firmware 10.0.0.43

Fixes:
- GSM73xxSv2h1 doesn't show the RPS status correctly using RPS5412
- Even if the user "logs out" using the "LOGOUT" button, the file can be downloaded
- Unable to apply the configure file to the switch after copy it from USB sticker
- GSM7352Sv2 - Stacking issues on 2 stacks. Getting ACK errors and failure to receive response
- GSM7328Sv2h2 - Can get only some trafic tru after the defaut route's host moved
- GUI: Stack with 8 members lead to mirror page malfunction
- GSM7352Sv2h2 - management access-list default allow seems to be only for TCP
- Duplicate MAC applied to IPSG same interface and VLAN cause GUI error
- Cannot change VLAN 2's name
- Vendor id is incorrect for radius commands authorization
- Mac Authentication Bypass Problem
- Switch rebooted itself when setting up a customer site.
- GSM7352Sv2h2 - 10 GB Link does not work after ACG761 plugged
- OSPF LSA vulnerability -- invalid LSA erases neighboring route tables
- Flow control became inactive after reboot in slave M5300 units
- 10G LAG is down after both DUTs reboot on M5300-28GF3
- GSM7328Sv2 -DHCP Manual mode is not working in 10.0.0.31
- Stack master restarts intermittently - Port Mirror
- Fiber port doesn't link up with ASUS switch using AGM731F with auto-negotiation
- GSM7352Sv2 - GSM Stack reports wrong temperature
- GSM7252PS - Random switches reset for no reason
- M5300-52G crash at emWeb
- Change the default setting of Auto-VoIP from enable to disable
- Unable to participate include/exclude to VLAN 2 after change voice VLAN to other VLANID
- The Function Cable test changes the Port speed
- GSM7352Sv2h2 - Getting MVR error when trying to add VLAN acceptframe VLANonly to LAG
- GSM7352Sv2h2 - Getting MVR error when trying to add VLAN acceptframe VLAN only to LAG
- Power LED is blinking after 'clear configure'
- "VLAN participation include" command is lost when migrating from the image version - 10.0.0.31 to 10.0.0.42