LG GSA-4165B DVD-RW Firmware DL05

Installation notes:

- Connect the drive as master by itself, on the secondary IDE controller with no other device on the same IDE cable, making note to set the jumper on the back of the drive to the master position.

- Download the file GSA-4165DL05(EW).ZIP to a folder of your choice. This download includes the GSA4165DL05.EXE program, which will auto-update your drive's firmware.

- Close all other programs including: screen saver, antivirus and/or power-down programs.If these programs are not closed, they will try to engage the PC, during the update process, thus interrupting the update and damaging the drive.

- Check the drive to ensure that there is no disk in the tray before you start the update procedure.

- Go into the folder with the update file and double click the GSA4165DL05.EXE program and click the update button (red). Once the update is complete, you will see “Firmware Update Complete” and the button will become green and advise you to reboot the system. You will need to reboot your PC.

- The update will be complete, after you reboot your system.

WARNING

: Do not open any programs or start any system functions during the update, as they will interfere with data transfer and damage the drive. Do not cancel the operation once it has been started or the drive will become permanently damaged, as a result.