Fixes:
- The EF release maintenance version needs to be incremented
- New 1078 Firmware can cause MegaCli halt sometimes
- unexpected sense 5/24/00 on SATA drives
- EF 11.0.1-0044 Mix of configured and unconfigured drives are not possible
- BBU3 in MP2 failing with "wrong FCC sensed in the battery"
- Data Corruption after Rebuild with uncorrectable medium error on RAID 6 LD
- Reconstruction resume of VD failed due to configuration mismatch
- OEM is doing the drive add/remove test on their 1078 ROMB designed system. The system can't see the drive after some cycles
- EF 11.0.1-0044 Data Corruption during Raid Level Migration
- Port LSIP200211420 from Invader - Upon OCR, Recon Ghost LD needs to be created before WJ processing
- The EF release maintenance version needs to be incremented
- New 1078 Firmware can cause MegaCli halt sometimes
- unexpected sense 5/24/00 on SATA drives
- EF 11.0.1-0044 Mix of configured and unconfigured drives are not possible
- BBU3 in MP2 failing with "wrong FCC sensed in the battery"
- Data Corruption after Rebuild with uncorrectable medium error on RAID 6 LD
- Reconstruction resume of VD failed due to configuration mismatch
- OEM is doing the drive add/remove test on their 1078 ROMB designed system. The system can't see the drive after some cycles
- EF 11.0.1-0044 Data Corruption during Raid Level Migration
- Port LSIP200211420 from Invader - Upon OCR, Recon Ghost LD needs to be created before WJ processing
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
- CATEGORY:
- Firmware
- COMPATIBLE WITH:
- Windows All
- file size:
- 9.3 MB
- filename:
- ir3_1078SASHWR_FWPKG-v11.0.1-0057.zip