HP ProLiant MicroServer Gen8 iLO 4 Firmware 1.40

Important:
- Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The following issues are resolved in this firmware version:

- Server Auto Power-On might be triggered when iLO is reset through IPMI.
- Firmware updates that use USB Virtual Media might fail due to secure flash image corruption.
- SSH sockets might take 30 seconds to close.
- The GET_OA_INFO command output does not include the OA IPv6 address.
- The iLO 4 SNMP stack might become unresponsive to SNMP requests.
- The file upload section is not displayed on the iLO web interface Firmware page.
- The Integrated Remote Console (IRC) stops working when iLO is busy.
- The .NET Integrated Remote Console (IRC) fails to start in Chrome if a trusted certificate is not installed.
- Kerberos Keytab files cannot be added from the iLO web interface.
- An error occurs if you register for Remote Support with proxy settings, and then you delete the proxy settings.
- Directory settings information is not consistent between the iLO web interface and the scripting interfaces.
- The server shuts down when a user exits the system RBSU during an iLO reset.
- Kerberos Keytab files cannot be added when FIPS mode is enabled.
- A service event is not generated when a hard disk drive fails during boot.
- The Acquire dialog box is displayed when the remote console is started, but there is no active session to acquire.
- The status of a spare drive changes to inactive when the spare drive is in use.
- When the security override switch is enabled, long login names might fail.
- TPM status cannot be viewed by using XML scripts.
- The IPv6 default gateway might be saved as a static default gateway.
- When configured for FIPS mode/AES-DES the key exchange method ‘diffie-hellman group1 sha1’ should not be supported.
- The iLO clock fails to synchronize with NTP when a Primary Time Server is not entered.
- The iLO webserver unexpectedly quits after the NVRAM is cleared.
- The iLO DHCPv6/EBIPA address is not displayed in OA when OA is configured on an IPv6-only network.
- The Backup ROM date is displayed incorrectly on the Diagnostics page in the iLO web interface.
- The IPMI Get Sensor Reading command returns incorrect data for the Inlet Ambient sensor.
- Auto Power-On takes two minutes when the delay is set to 15, 30, 45, or 60 seconds.
- Some Power On Self Test (POST) errors might be truncated in the Integrated Management Log (IML).
- The output of the RIBCL GET_POST_STATE command shows the output for the HOST_POWER command.
- If the Shared Remote Console feature is not licensed, an error message should be displayed when a user clicks the Share button.
- iLO cannot be configured to propagate the NTP or OA time setting to the host.
- An SSH session is not logged out when AES/3DES is enabled or disabled by using the CLI.
- The iLO CLI and web interface have different length requirements for the FQDN.
- There is no warning message in the CLI when the power mode is set to OS control.
- The Login Security Banner does not work consistently between the iLO web interface and iLO scripts.
- The remote console displays multiple CD-ROM drives with the same drive letter.
- The SSH interface might freeze after multiple back-to-back connections.
- An iLO system with no installed certificates reports that the maximum number of certificates is reached.
- The temperature graph in the iLO web interface shows details for only one sensor when multiple sensors have the same coordinates.
- The SNTP settings are not displayed in the iLO web interface after a firmware update.
- An error occurs when the iLO firmware is updated by using the CLI.
- The CPU temperature is reported incorrectly.
- An event is not generated when the default language is changed by using scripts or the CLI.
- An error message is not displayed when an incorrect firmware URL is entered.
- The Integrated Management Log (IML) displays an error when a maintenance note is entered.
- An event is not generated when a power-on error occurs.
- The VLAN tag cannot be configured by using the iLO RBSU.
- The iLO firmware date is displayed incorrectly in the iLO RBSU.
- A warning message does not occur when the Local User Accounts setting is changed to Disabled for an iLO system that does not have a configured directory.
- The power-on delay options are inconsistent between the iLO web interface and the CLI.
- The Intelligent Provisioning version is not displayed on the iLO System Information > Firmware page.
- The Enterprise Secure Key Manager (ESKM) certificate is deleted if no certificate name is entered.
- The CLI labels a mismatched power supply with OK status.
- An event is not generated when a language pack update fails.
- An event is not generated when the Power Regulator settings are modified.
- WINDBG with port number 65535 cannot be enabled from the iLO CLI.
- Duplicate IP addresses are not detected.
- iLO 4 1.20 and later does not send ARP before replying to a ping request. This causes iLO 4 to be unreachable to pings from clients with teamed NICs.
- Solaris 10 and 11 cannot be installed by using Virtual Media
- The SNTP time zone offset is incorrectly applied to the time provided by the OA when c-Class blade servers are inserted into the enclosure or are e-fused.
- When the server serial number is updated in the BIOS, the system board FRU data is not updated.

This version adds support for the following features and enhancements:

- Insight Remote Support Direct Connect configuration is available in iLO 4 1.40 and later.
- iLO 4 1.40 and later supports the HP Enterprise Secure Key Manager ESKM 3.1 and later, which can be used in conjunction with HP Secure Encryption.
- Improved Java Integrated Remote Console (IRC)
- UEFI System Utilities support on the HP ProLiant DL580 Gen8 server.
- iLO Federation Management

NOTE:

- iLO Federation Management is supported on IPv4 and IPv6 networks on the iLO Dedicated Network Port. It is not supported on iLO Shared Network Port.