HP LaserJet M3035MFP Base / XS / M3027MFP / X Series Firmware for Single/Multiple Printers 48_240_0B
This firmware version installs code signing verification functionality. Firmware signed by HP guarantees the integrity and authenticity of the code; meaning that the firmware was produced by HP (authenticity) and that the firmware has not been altered in any way (integrity).
Once this firmware has been applied to your printer or multifunction device it CANNOT BE DOWNGRADED to a previous version of firmware.
It is important to note that Code Signing Verification functionality has been provided with this version of firmware and will be provided with all future versions of firmware, therefore, the ability to downgrade to a previous version of firmware no longer exists.
The Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates.
HP LaserJet M3035mfp Base, HP LaserJet M3035mfp XS, HP LaserJet M3027mfp, HP LaserJet M3027mfp X,
CB414A, CB415A, CB416A, CB417A
When this update is performed, a manual power cycle will be required if updating from version 20070614 48.031.6 or versions prior to this release. This means that someone must manually turn the power of the device "off" and "on" using the power switch. No methods that are available to remotely power cycle the device will work. Only turning the power switch "off" and back "on" will finish the update process.
It is important to note that the device will still receive faxes and in most cases, a user will be able to send a fax, digital send, copy and print while in this state. The update process will not be complete until the power switch has been turned "off" and "on" and the mfp comes to a READY state. This means that certain issues and behavior changes addressed by this update will not be available until update is complete. HP highly recommends not leaving the device in this state and power cycling to assure correct product behavior.
- Base Product:
Now you are able to set tray 2 as the default tray for copying and have the MFP pull from tray 2 regardless of what type is in the tray.
The ability to retain Personal Stored Jobs through a Power Cycle.
- Embedded Digital Sending:
Support for password encrypted PDF has been added. When the password encrypted PDF feature is enabled, users will be prompted for a password when scanning a document at the MFP. This password is used as the encryption seed, and will need to be entered.
- Analog Fax:
No new updates
- Embedded Jet Direct:
802.1x failure to negotiate disables networking
No SSL Proxy available to Auto-Send
Secure@Install support is now available
SNMPv3 privacy and authentication use keys rather than passphrases
Fixes Or Improvements:
This firmware provides fixes or improvements for following issues:
- Adding Job storage support to Copy ID feature
After restore factory settings, the Smartcard authentication window is not displaying on the MFP Control Panel, even though all configurations are re-configured.
Certain Japanese characters are being desplayed incorrectly on the front control panel.
In some cases you may not be able to cancel a copy job after starting to copy multiple jobs.
Incorrect characters are appearing on UI in Language screen when MFP language is changed to Japanese
The phrase "To use AutoSend with E-mail, you must first configure your E-mail Serve"' was not localized in Slovak and Russian languages.
The scanner may fail to initialize properly after a soft reboot is performed while the device is in sleep mode.
When connected to a Multi Function Finisher and a paper jam occurs, you may still see the error on the control panel even after clearing the jam.
You may not be able to cancel a job If a user starts to feed a document through the ADF, then changes their mind after checking the glass.
You may see a "PCL-XL Error: IllegalMediaSize" when printing A6 media size (Tray 1) from Word (Office 2003/2007) from XP SP3 to the CP3505 with Latest 11.1 FW installed. Printing from the UPD causes the PCL-XL error. But discrete driver works fine.
- Embedded Digital Sending:
Email addresses (including Fax Notification) may not be consistently set from device security services.
For devices with the HP US Government SmartCard Authentication solution enabled, after a cold reset Send to Network Folder, Send to Fax, and Send to Email are unable to be configured through the device Embedded Web Server after a cold reset.
Send to FTP will generate 0 bytes files in in FTP destination when the device is in ACTIVE mode and with a firewall enabled on the FTP server.
- Analog Fax:
Ringdale - Changes to the Fax application system variables do not take effect until after a reboot.
Embedded RightFax Metadata File May be incompatible with DSS
Missing thumbnails while receiving faxes
- Embedded Jet Direct:
A "Reflected XSS" is possible due to redirection to HTTPS
Certificate Signing Requests specify 1024 bit keys; should specify 2048 bit keys
Crash results when a duplicate IPv6 address is encountered
Crash results when navigating to Refresh Rate in Networking pages
Misbehavior when DHCP NAK received
SSL vulnerable to a Cipersuite downgrade attack
SSL vulnerable to a man-in-the-middle renegotiation attack
The default key size for Certificate Signing Requests should be 2048 bits not, 1024
It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
- Graphics Board
- Other Drivers & Tools
- Digital Camera / Webcam / Camcorder
- Sound Card
- Printer / Scanner
- Network Card
- Keyboard & Mouse
- Joystick, Gamepad & Wheels
- TV Tuner / Capture Card
- Mobile Phones
- Card Readers
- HDD / SSD / NAS / USB Flash
- TV / HDTV / Projectors
- DVD / Blu-Ray / Media Players
- Router / Switch / AP
- Doesn't matter
- 3 months
- 6 months
- 12 months
- 24 months