Foscam FI8910W IP Camera Firmware 11.22.2.51

  n/a
Manufacturer:

Description

DOWNLOAD NOW

New features:

1) Add a new feature to enable and disable Manufacturer's DDNS
2) Add WPS feature
3) Add Russian, Korean, Indonesian, Danish, Czech, Turkish
4) Disable UPNP in default factory settings
5). Enhance security to prompt user change the default blank login password

Fixed bugs:

1) Fix several vulnerabilities to improve security
2) Fixed the bug that not so compatible with IE 10 on Windows 8
3) Fixed OSD changed to Disable on IE when back to live page from administration page

Note:

After upgrading to this version, it cannot downgrade to previous versions

How to upgrade firmware for Indoor PT camera

Preparation for upgrading:
1) Plug in the Ethernet cable to upgrade firmware, not via wireless.
2) Upgrade the system firmware firstly and web UI secondly.
3) Keep power on during the upgrading.

Method 1:

Upgrade firmware on IP Camera Tool
Step 1: Highlight and right click the camera and then go to Upgrade Firmware.
Step 2: Enter the user and password of camera. The default user is ‘admin’ and password is blank.
Step 3: Update System Firmware. Click Upgrade System Firmware select system firmware click Open. After reboot, the system firmware is loaded successfully.
Step 4: Upgrade Web UI. Repeat step and 2. Click Upgrade WEB UI select Web UI firmware click Open. After reboot, the Web UI is loaded successfully.
Step 5: You can check new firmware on Basic Properties. Highlight and right click the camera and then go to Basic Properties.

Method 2:

Update firmware on Upgrade Device Firmware.
Step 1: Log into camera, click Device Management Upgrade Device Firmware.
Step 2: Update System firmware. Click Browse select system firmware click Open click Submit. After reboot, the system firmware is loaded successfully.
Step 3: Update Web UI firmware. Click Browse select Web UI firmware click Open click Submit.
After reboot, the Web UI is loaded successfully.
Step 4: You can check new firmware on Device Status page.

About Network Camera Firmware:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

Foscam FI8910W Wireless Camera Firmware Foscam FI8910W WiFi Camera Firmware Foscam FI8910W Network Camera Firmware FI8910W Firmware Foscam IP Camera

  CATEGORY:
Firmware
  COMPATIBLE WITH:
OS Independent
  file size:
2.8 MB
  filename:
MJPEG indoor PT camera-11.22.2.51.zip