D-Link DWS-3160-24PC Wireless Access Point Firmware 1.00.038
Manufacturer: D-Link
Date: Jun 27, 2013
How to update to the new firmware:
- Start the browser, we recommend Internet Explorer or Firefox
- Access the configuration UI of the DAP-2690 (default IP address: 192.168.0.50, subnet 255.255.255.0)
- Click> Firmware and SSL verification Update
- Click on top of the menu on the item "Maintenance"
- Go to the "Update firmware from file" and click on the button "Browse"
- Select the firmware file (.bin File)
- Click on the "Upload" button
- After the update is complete the AP needs to reboot
- Start the browser, we recommend Internet Explorer or Firefox
- Access the configuration UI of the DAP-2690 (default IP address: 192.168.0.50, subnet 255.255.255.0)
- Click> Firmware and SSL verification Update
- Click on top of the menu on the item "Maintenance"
- Go to the "Update firmware from file" and click on the button "Browse"
- Select the firmware file (.bin File)
- Click on the "Upload" button
- After the update is complete the AP needs to reboot
Do not perform the update of any D-Link products over a wireless connection! If you do that you risk to permanently damage the AP module!
After the update, please perform a factory reset:
- Continuously press the reset button, located on the front side of the Access Point, for 10 seconds.
- Your settings will be lost and the AP needs to be reconfigured.
- Do not install a configuration file from a previous version of a firmware!
- CATEGORY:
- Firmware
- COMPATIBLE WITH:
- Windows All
- file size:
- 7.8 MB
- filename:
- DWS-3160-24PC_fw_revALL_1-00-038_all_en_201211.zip