* Chassis
G2-type aluminum chassis, silver color
storage bays: 1 x 5.25", 2 x 3.5" (1 internal)
dimensions: 30 x 20 x 18.5 cm (LWH),
weight: 3.2 kg net / 4.8 kg gross
* Mainboard
Shuttle FD32, Shuttle form factor,
proprietary mainboard design for Shuttle XPC Barebone SD32G2
Chipset: Intel 945G (Lakeport-G) ICH7
Award V6.0PG BIOS, 4MBit flash memory
with hardware monitoring and ACPI power management functions
dimensions: 25.4 x 18.5 cm
* Power supply
SilentX 250 Watt mini PSU, supports 100~240V,
connectors: 20-pin ATX, 4-pin ATX12V
EMI certified: FCC, CE, BSMI; Safety certified: UL, TÜV, CB
* Processor support
Socket 775 supports dual core and single core Intel processors:
Core 2 Duo, Pentium D, Pentium 4 and Celeron D
Supports 1066, 800 and 533 FSB clock frequency
Supports 65nm and 90nm manufacturing technology
supports Hyper-Threading and 64-bit extension (EM64T)
* Processor cooling
Shuttle I.C.E. (Integrated Cooling Engine)
advanced I.C.E. Heatpipe technology, linear controlled 92mm fan
SilentX cooling and noise reduction technology with Active Airflow
* Memory support
2 x 240 pin slots, supports Dual Channel
supports DDR2-533/667 DDR SDRAM memory up to a total size of 2 GB,
max. 1 GB per DIMM
* Slots
1 x PCI-Express (16X) supports 8 GB/s data transfer
1 x PCI (32 bit)
* Graphics
Intel Graphics Media Accelerator 950 (GMA950)
with PCI-E x1 improved bandwidth, features 333MHz graphics core
DX8/DX9 support and enhanced 3D performance
Dynamic Video Memory Technology (DVMT) 3.0, shared Memory max. 256MB
* 8-channel audio
7.1 channel High Definition Audio, Realtek ALC882
analog: line-out (8-ch), line-in, microphone
Optional optical SPDIF input/output (digital audio)
* Gigabit LAN Controller
Marvell 88E8001 Ethernet network controller (Gigabit)
supports 10 / 100 / 1.000 MBit/s operation, supports Wake-on-LAN
* Firewire Controller
Firewire controller VIA VT6308
IEEE1394 OHCI V1.0 compliant
with 2 Firewire connectors (front and rear)
supports 400Mb/s, 200Mb/s, 100Mb/s data transfer rate
* Drive connectors
2 x Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth,
1 x IDE ATA 100 drives
1 x floppy disk drive
* Front Panel connectors
Microphone
Headphone (Line-out)
2x USB 2.0
Firewire (Mini 4 pin connector)
Power button
Reset button
* Back Panel connectors
VGA connectorr (D-Sub 15 pol.)
4x USB 2.0
Gigabit LAN (RJ45)
Firewire (6 pin)
PS/2 for mouse and keyboard
Serial port (COM)
8-ch Audio line-out (2x rear/front, bass/center, surround/back)
SPDIF: optical in/out, coaxial out
Audio Line-in
CMOS button
optional Wireless LAN module (PN18)
optional parallel port (PC8/PC9)
optional optical SPDIF input/output ports (PC17)
* Other connectors
2 x fan connectors (4 pin)
* Accessories
Multi-language user guide,
32-bit Driver CDROM, 64-bit Driver CDROM,
Shuttle Extras CDROM,
I.C.E. heat-pipe module,
Cable for FDD, SATA (1x), PATA (1x)
Power cord,
Screws, Heatsink Compound
* Conformity
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits

It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.