* Chassis
Shuttle T-type chassis, Nano BTX Form Factor, black color
storage bays: 2 x 5.25", 2 x 3.5" (1 internal)
dimensions: 31 x 18.8 x 31 cm (LWH) = 18.07 liter
Temperature-controlled 9cm cooling fan
* Mainboard
Shuttle FS31, Shuttle form factor, proprietary design for SS31T
chipset: SiS 662 Northbridge and SiS 966L Southbridge
* Power supply unit
250 Watt PS3 Switching Power Supply with on/off switch and 9cm cooling fan
Voltage switch for 115/230V AC input voltage
Active PFC: Power-Factor-Correction with active components
connectors: 20 4 pin BTX, 4 pin ATX12V
EMI Certified: FCC, CE, CCC
Safety Certified: UL, TÜV, CB, CCC, CSA, NEMKO
Power cord: region specific
* Processor support
Socket 775 supports Intel Pentium D, Pentium 4 and Celeron D processors
at 800 und 533 FSB clock rate
supports Intel 65nm/90nm Single Core and Dual Core processors
supports Hyper-Threading and TM2 (Thermal Management 2)
Standard processor cooler required (no BTX design).
* Memory support
2 x 240 pin DIMM sockets
supports DDR2-533/667 memory
up to a total size of 2GB, max. 1GB per module
* Expansion slots
1 x PCI-Express 16X graphics slot (PEG)
1 x 32 Bit PCI (v2.2)
* Integrated graphics controller
SiS Mirage 256-bit 3D engine
DirectX 7.0 compliant
shared Memory max. 128MB
* 6-channel Audio
5.1 channel AC97 v2.3 audio controller, Realtek ALC655 Codec
Connectors: Head phone, Microphone, Line-in, Line-out, optional SPDIF in/out
The connectors for Microphone and Line-in can be shared
in order to expand the Line-out to a 5.1 channel solution.
* LAN controller
Fast Ethernet network controller, Broadcom AC 131
supports 10 / 100 MBit/s opteration
IEEE 802.3u 100Base-T specifications compliant
* Drive connectors
2 x Serial-ATA 150 supports Raid 0, 1, JBOD, NCQ
1 x IDE ATA 133 drives
1 x floppy disk drive
* Front-panel I/O and Buttons
Microphone
Headphone (Line-out)
2x USB 2.0
Power button
LED Indicator for power (blue) and HDD (orange)
* Back-panel I/O
VGA connector for monitor (D-Sub)
PS/2 for mouse and keyboard
LAN (RJ45)
4 x USB 2.0
Microphone
Line-in
Line-out
Serial port (COM)
optional parallel port (PC8/PC9)
optional SPDIF I/O for digital 5.1 audio (PC17)
* Other onboard connectors
1x USB 2.0 (5 pin) e.g. for WLAN module PN18
1x audio input (AUX)
1x connector for SPDIF input/output (6 pin, for PC17)
2x fan connectors (à 4 pin)
1x parallel interface connector (for PC8/PC9)
Clear CMOS Jumper
* Accessories
Multilanguage quick user guide
Mainboard driver CDROM
(incl. RAID driver, RAID manual, Mainboard user guide)
Cables for FDD, IDE and SATA
Power cord
Screws and Heatsink compound
* Conformity
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits

It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.