* Chassis
P2-type aluminum chassis, color: black
storage bays: 1 x 5.25", 3 x 3.5" (2 hidden)
stealthed drive doors
Power and Reset buttons at the front and Clear CMOS button at the backpanel
dimensions: 32.5 x 22 x 21 cm (LWH)
* Mainboard
Shuttle FN27, Shuttle form factor, proprietary design for SN27P2
chipset: NVIDIA nForce 570 Ultra MCP (Codename: MCP55-Ultra)
Dimensions: 20.5 x 28 cm
* Power supply unit
SilentX 400 Watt mini PSU with switch, supports 100~240 VAC, PFC
connectors: ATX Main Power and 12V Power
EMI Certified: CE, FCC, C-Tick, BSMI
Safety Certified: UL, TÜV, CB, BSMI
* Processor support
Socket AM2 supports
AMD Athlon™ 64, Athlon™ 64 FX, Athlon™ 64 X2 and Sempron
Single- and Dual-Core processors (Rev. F) with DDR2 interface
1 GHz system bus with 2000MT/s Hyper-Transport link
* Processor cooling system
Shuttle I.C.E. (Integrated Cooling Engine)
advanced Heatpipe technology
three cooling zones, linear fan control, 4-pin fan connector
* Power Management
compatible with ACPI Revision 2.0 and PCI PMI 1.1
Power On Suspend (POS) or ACPI S1 support
Supend to RAM (STR) or ACPI S3 support
Suspend to Disk (STD) or ACPI S4/S5 support
Supports C0, C1, C2 and C3 states
* Memory support
4 x 240 pin slots supports DDR2-800/667 memory modules
max. 2 GB per DIMM up to a total size of 8 GB
Dual Channel memory controller, supports unbuffered RAM
* Expansion slots
1x PCI-Express 16X, supports Dual-Slot graphics cards
1x PCI (32 Bit)
* 8-channel Audio
7.1 + 2 HD channel Audio Codec (Realtek ALC882)
High-performance 103dB playback SNR quality
Playback sampling rates up to 192 kHz
Analog: line-out (8-ch), line-in, microphone, CD-in, AUX
Digital: optical SPDIF-in/out, coaxial SPDIF-out
* Gigabit LAN controller
Integrated Gigabit Ethernet network controller with Marvell® 88E1116 PHY
With NVIDIA Hardware Firewall (supports IPv4 and IPv6)
Supports 10 / 100 / 1.000 MBit/s opteration
Supports power saving mode
* Firewire controller
IEEE1394 Firewire controller VIA VT6307
With 2 Firewire connectors (front and rear)
Supports 400Mb/s, 200Mb/s, 100Mb/s data transfer rate
Compliant with 1394 OHCI specification revision 1.0
* Drive connectors
4 x Serial-ATA 3Gb/s (300 MB/s, 3 GBit/s)
3 internal and 1 external port connectors
Supports MediaShield™ RAID with support for Raid 0, 1, 0+1, 5 and JBOD
Supports Native Command Queuing (NCQ) and Tagged Command Queuing (TCQ)
1 x IDE ATA 133 drives
1 x floppy disk drive
* Front-panel I/O
Microphone
Headphone (Line-out)
2x USB 2.0
IEEE1394a Firewire (Mini port, 4 pol.)
Power and Reset buttons
* Back-panel I/O
6x USB 2.0
IEEE1394a Firewire (6 pin)
Serial-ATA 3 GBit/s (eSATA connector for external storage device)
Gigabit LAN (RJ45)
8-ch Audio line-out (2x rear/front, bass/center, surround/back)
Line-in
SPDIF: optical in/out, coaxial out
CMOS button
Optional Wireless LAN module
* Other onboard connectors
2 x USB 2.0, 1x5 pins each (total 10x)
1 x AUX audio in
4 x fan connectors (4 pins each)
* Accessories
Multilanguage XPC User Guide
XPC driver CDROMs for 32bit and 64bit operating system
Shuttle Extras CDROM (Software)
RAID Installation Guide and RAID driver floppy disk
I.C.E. Technology CPU heat-pipe
Cables for FDD, IDE ATA133, Serial-ATA
Power cord
Screws pack and heatsink compound
* Conformity
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits

It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.