* Chassis
G2-type chassis made of aluminum, black color
storage bays: 1 x 5.25", 2 x 3.5" (1 internal)
dimensions: 30 x 20 x 18.5 cm (LWH)
weight: 3.4 kg net / 4,65 kg gross
Slim-line and pre-installed cabling removes airflow impedance
and makes installation a snap
* Mainboard
Shuttle FX22, Shuttle form factor, proprietary design for SK22G2
Chipset: VIA K8M890CE VIA VT8237R
Phoenix/AwardBIOS, 4MBit flash memory
with hardware monitoring and APM 1.2 / ACPI 2.0 power management functions
dimensions: 25.4 x 18.5 cm
* Power supply unit
200 Watt mini PSU, Input voltage: 100~240 VAC
Active PFC: Power-Factor-Correction with active components
connectors: 20-pin ATX, 4-pin ATX12V
EMI Certified: FCC, CE, BSMI, CCC
Safety Certified: UL, TÜV, CB, BSMI, CCC
Power cord: region specific
* Processor support
Socket AM2 (940 pins) supports the following processors:
AMD Athlon 64, AMD Athlon 64 X2 and AMD Sempron
* Processor cooling system
Shuttle I.C.E. (Integrated Cooling Engine)
advanced Heatpipe technology
linear fan control, 92mm cooling fan
* Memory support
2 x 240 pin DIMM sockets
supports DDR2-533/667/800 SDRAM memory, Dual Channel
up to a total size of 4GB, max. 2GB per module
* Expansion slots
1 x PCI Express 16X graphics slot (PEG)
1 x 32 Bit PCI (v2.2)
* Integrated graphics controller
VIA DeltaChrome 128-bit 2D/3D graphics engine
DirectX 9.0 compliant, shared Memory max. 256 MB
* 6-channel Audio
5.1 channel AC97 audio controller
Realtek ACL 655 CODEC
Connectors: line-out (6-ch), line-in, microphone, CD-in
* LAN controller
Fast Ethernet network controller (VIA VT6103)
supports 10 / 100 MBit/s opteration
IEEE 802.3u 100Base-T specifications compliant
* Firewire controller
IEEE1394 Firewire controller VIA 6307
with 2 Firewire connectors (1x front and 1x rear)
supports 400Mb/s, 200Mb/s, 100Mb/s data transfer rate
* Drive connectors
2 x Serial-ATA 150, supports RAID 0, 1, JBOD
1 x IDE ATA 133 drives
1 x floppy disk drive
* Front-panel I/O
Microphone
Headphone (Line-out)
2x USB 2.0
Firewire (4 pol., mini port)
Power and Reset buttons
* Back-panel I/O
VGA connector for monitor (D-Sub)
Firewire (6 pin)
PS/2 for mouse and keyboard
LAN (RJ45)
4 x USB 2.0
6-ch Audio line-out (2x rear/front, bass/center)
Line-in
Serial port (COM)
Clear CMOS button
optional Wireless LAN module (PN15g/PN18)
optional parallel port (PC8/PC9)
* Other onboard connectors
2 x USB 2.0 (2x5 pin, total 8x)
1 x AUX audio input
2 x fan connectors (3 pin and 4 pin)
* Accessories
User Manual
Shuttle I.C.E. Thermal Module (heat-pipe)
Cables for floppy drive, IDE drive and S-ATA drive
Power cord
Driver CDROM (32- and 64-bit driver)
RAID floppy disc
XPC Extras CDROM
Screws and heatsink compound
* Conformity
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits

It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.