Specifications:


A33G is one of the most advance and unique modules of PCCHIPS production.It can also support latest AMD AM2 CPUs,up to 1000MHz FSB,Dual-DDR2 800,two Serial ATA and 8 USB 2.0 ports.With embedded Mirage1 Graphic engine,128M share memory,one PCI ExpressX16 slot and one PCI ExpressX1 slot,all these advance supports,we believe your computer can run with best performance and bring you the great value and enjoyment.




CPU
Socket AM2 for AMD Athlon 64 FX/Athlon 64 x2 Dual-core/Athlon 64/Sempron processor
FSB
1000 MHz
Storage
Supported by SiS965L
- 4 x Ultra DMA133/100/66 devices
- 2 x Serial ATA devices
RAID 0, 1, 0 1 configuration
Chipset
SiS 761GX/965L
VGA
Embedded Mirage Graphics with 128MB share memory
Memory
Dual-channel DDR2 memory architecture
2 x 240-pin DDR2 DIMM sockets support up to 16 GB
Support DDR2 800/667/533/400 DDR2 SDRAM
Expansion Slots
1 x PCI Express x 16 slots
1 x PCI Express x 1 slot
2 x PCI slots
1 x CNR slot
LAN
Boardcom AC131 10/100Mbps Fast Ethernet Phy
Audio
Realtek ALC655 6-channel audio codec
Compliant with AC'97 2.3 specification
Back Panel I/O Ports
1 x PS/2 keyboard
1 x Parallel Port
1 x VGA port
4 x USB 2.0 Ports
1 x Audio I/O (Line-in, Line-out and Mic-in)
1 x PS/2 mouse
1 x Serial Port
1 x RJ 45 Port
Internal I/O Connectors & Headers
24-pin ATX Power Supply connector
2 x USB 2.0 header support additional 4 USB2.0 ports
1 x Front panel switch/LED header
CPU / SYS FAN headers
1 x Speaker header
1 x Floppy connector-support 360K~2.88M Byte, 3 Mode FDDs or LS120
4-pin ATX 12V power supply connector
2 x Serial ATA connectors
1 x Front panel audio header
1 x IrDA for SIR header
1 x CD in header
System BIOS
AMI 4Mb Flash ROM
Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
Full support for ACPI revision 1.0 specification
Form Factor
Micro-ATX Form Factor, 244*200mm



It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.