Gigabyte GA-Z77X-UP7 (rev. 1.0) BIOS F5j Beta

  n/a
Manufacturer:

Description

DOWNLOAD NOW

Specifications:

CPU:
- Support for Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package
- L3 cache varies with CPU

Chipset:

- Intel Z77 Express Chipset

Memory:

- 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
- Dual channel memory architecture
- Support for DDR3 1600/1333/1066 MHz memory modules
- Support for non-ECC memory modules
- Support for Extreme Memory Profile (XMP) memory modules

Integrated Graphics Processor:

- 1 x D-Sub port
- 1 x DVI-D port, supporting a maximum resolution of 1920x1200
- 1 x HDMI port, supporting a maximum resolution of 1920x1200
- 1 x DisplayPort, supporting a maximum resolution of 2560x1600

Audio:

- Realtek ALC898 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF In
- Support for S/PDIF Out

LAN:

- 1 x Atheros GbE LAN chip (10/100/1000 Mbit) (LAN1)
- 1 x Intel GbE LAN chip (10/100/1000 Mbit) (LAN2)

Expansion Slots:

- 3 x PCI Express x16 slots, running at x16 (PCIEX16_1~3)
- 2 x PCI Express x16 slots, running at x8 (PCIEX8_1~2)
- 2 x PCI Express x1 slots

Multi-Graphics Technology:

- Support for 4-Way/3-Way/2-Way AMD CrossFireX/NVIDIA SLI technology

Storage Interface Chipset:

- 2 x SATA 6Gb/s connectors (SATA3 0~1) supporting up to 2 SATA 6Gb/s devices
- 4 x SATA 3Gb/s connectors (SATA2 2~5) supporting up to 4 SATA 3Gb/s devices
- 1 x mSATA connector
- Support for RAID 0, RAID 1, RAID 5, and RAID 10

2 x Marvell 88SE9172 chips:

- 4 x SATA 6Gb/s connectors (GSATA3 6~9) supporting up to 4 SATA 6Gb/s devices
- Support for RAID 0 and RAID 1

USB Chipset:

- Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
- Up to 4 USB 2.0/1.1 ports (available through the internal USB headers)

VIA VL800 chip:

- Up to 4 USB 3.0/2.0 ports on the back panel

Etron EJ168 chip:

- Up to 2 USB 3.0/2.0 ports (available through the internal USB header)

Internal I/O Connectors:

- 1 x 24-pin ATX main power connector
- 2 x 8-pin ATX 12V power connectors
- 1 x PCIe power connector
- 6 x SATA 6Gb/s connectors
- 4 x SATA 3Gb/s connectors
- 1 x mSATA connector
- 1 x CPU fan header
- 6 x system fan headers
- 1 x front panel header
- 1 x front panel audio header
- 1 x S/PDIF Out header
- 1 x S/PDIF In header
- 2 x USB 3.0/2.0 headers
- 2 x USB 2.0/1.1 headers
- 1 x serial port header
- 1 x Clear CMOS jumper
- 1 x power button
- 1 x reset button
- 1 x Clear CMOS button
- 1 x Gear button
- 1 x CPU BCLK Down button
- 1 x CPU BCLK Up button
- 1 x CPU Ratio Down button
- 1 x CPU Ratio Up button
- 1 x onboard voltage measurement module
- 2 x BIOS switchs
- 1 x LN2 switch

Back Panel Connectors:

- 1 x PS/2 keyboard/mouse port
- 1 x D-Sub port
- 1 x DVI-D port
- 1 x optical S/PDIF Out connector
- 1 x HDMI port
- 1 x DisplayPort
- 6 x USB 3.0/2.0 ports
- 2 x RJ-45 ports
- 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)

I/O Controller:

- iTE I/O Controller Chip

H/W Monitoring:

- System voltage detection
- CPU/System temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU/System fan speed control

BIOS:

- 2 x 64 Mbit flash
- Use of licensed AMI EFI BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

Unique Features:

- Support for BIOS
- Support for Q-Flash
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for EasyTune
- Support for eXtreme Hard Drive (X.H.D)
- Support for Auto Green
- Support for ON/OFF Charge
- Support for Q-Share
- Support for 3D Power
- Support for EZ Setup

Form Factor:

- E-ATX Form Factor; 30.5cm x 26.4cm




GA-Z77X-UP7 (rev. 1.0) BIOS Update GA-Z77X-UP7 (rev. 1.0) Motherboard BIOS Gigabyte GA-Z77X-UP7 (rev. 1.0) BIOS Update GA-Z77X-UP7 (rev. 1.0) BIOS Gigabyte Motherboard