EVGA X99 Micro BIOS 1.14

Fixes:

- Support Xeon CPU.
- Support UEFI RAID. The UEFI RAID configuration page will exist under Advanced page when user set to RAID mode and disable CSM function.
- Support disable CPU cores by per core.
- Add USB profile function. User can save profile to USB and load from USB.
- Add load last saved settings function. (Hot key F9) User can load last settings even if clean CMOS.
- Add VT-d item under CPU configuration page.

Xeon CPU support list:

- Xeon E5-1680 V3 3.20 GHz
- Xeon E5-1660 V3 3.00 GHz
- Xeon E5-2695 V3 2.30 GHz
- Xeon E5-2697 V3 2.60 GHz
- Xeon E5-2670 V3 2.30 GHz
- Xeon E5-2660 V3 2.60 GHz
- Xeon E5-2687W V3 3.10 GHz
- Xeon E5-2687W V3 3.10 GHz
- Xeon E5-2685W V3 2.60 GHz
- Xeon E5-1650 V3 3.50 GHz
- Xeon E5-2667 V3 3.20 GHz
- Xeon E5-2630L V3 1.80 GHz
- Xeon E5-2609 V3 1.90 GHz
- Xeon E5-2609 V3 1.90 GHz
- Xeon E5-1620 V3 3.50 GHz
- Xeon E5-2643 V3 3.40 GHz
- Xeon E5-1630 V3 3.70 GHz
- Xeon E5-2603 V3 1.60 GHz
- Xeon E5-2620 V3 2.40 GHz
- Xeon E5-2640 V3 2.60 GHz
- Xeon E5-2623 V3 3.00 GHz
- Xeon E5-2637 V3 3.50 GHz

Windows Installation:

- Download the correct .zip file
- First go into your BIOS and load defaults, save and exit
- Close all open programs.
- Go into the folder where you unzipped this package and update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
- NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.

BIOS Installation:

- Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
- Reboot the machine and go into the system BIOS
- From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
- Select the .bin file you wish to flash.