Fixes:
1. After the ExpressCard which the ISDN-USB device(AVM FRITZ! Card USB V2.1)
was connected to is disconnected during the S3 state, the PC can not resume
from the S3 state.
2. There is a possiblility that a bluescreen occurs when S4->resume is running
after a Expresscard which some HID devices was connected to is disconnected
during S4.
3. There is a possibility that a bluescreen occurs when a filter driver between
the function driver and the Host driver issues a request though the function
driver does not start.
4. The Devices and Printers of Windows 7 show the unwanted Icon of a printer.
5. PC cannot run "System Image Recovery" from External HDD on USB3.0 Port.
6. The USB-FDD device is not detected when it is first connected to USB 3.0 port.
1. After the ExpressCard which the ISDN-USB device(AVM FRITZ! Card USB V2.1)
was connected to is disconnected during the S3 state, the PC can not resume
from the S3 state.
2. There is a possiblility that a bluescreen occurs when S4->resume is running
after a Expresscard which some HID devices was connected to is disconnected
during S4.
3. There is a possibility that a bluescreen occurs when a filter driver between
the function driver and the Host driver issues a request though the function
driver does not start.
4. The Devices and Printers of Windows 7 show the unwanted Icon of a printer.
5. PC cannot run "System Image Recovery" from External HDD on USB3.0 Port.
6. The USB-FDD device is not detected when it is first connected to USB 3.0 port.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
- CATEGORY:
- Other Drivers & Tools
- COMPATIBLE WITH:
- Windows 7
Windows 7 64 bit - file size:
- 6.8 MB
- filename:
- R299161.exe