14 DAY TRIAL // Pioneer has rolled out a new firmware package developed for its DJM-TOUR1 digital mixer, namely version 2.00, which manages to enhance the internal digital signal dithering process (DSP), thus providing a better sound quality.
In addition to that, the producer visually improves the AUTO, TAP and BEAT functions found on the main display, and fixes the channel level indicator that was lit when launching.
Last but not least, if applied, the present firmware will also resolve the audio output problem spotted when changing Beat FX or FX channels, as well as remove the bug that caused a switching noise to be heard upon changing the USB Output Level.
When it comes to installation, first save and unzip the downloadable archive, transfer the .upd file onto an empty USB drive, and make sure your touring setup is powered off and no devices or cables are connected to it.
Afterward, turn on the mixer while pressing both On/Off (BEAT FX) and MID (FX FREQUENCY) buttons to enter the Update mode, insert the USB flash drive, and wait as the DJM unit installs the new firmware (the progress will be displayed).
Once finished, the display will show a “Complete” message; at this point, turn off the mixer, remove the USB drive, and you’re done. However, make sure not to interrupt the upgrade in any way, as this will lead to serious malfunctions.
That said, download Pioneer DJM-TOUR1 Mixer Firmware 2.00, install it to enjoy the changes mentioned above, and check back with us as often as possible to be aware when a newer version is available for your device.
